Promotions

Filtres actifs

  • Diamètre (D) :30mm clear
  • Diamètre (D) :147mm clear
  • Diamètre (D) :D(20mm) d(14mm) clear
Bevel cutter with center tip 45° S8mm | Titman Tools
  • -15%

Fraises à chanfreiner

Bevel cutter with center tip 45° S8mm

Ref: BCF45-8
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
83,00 € -15% 70,55 € 
Multiradius set R12, R15, R18 and R20 mm Bore 30mm | Stark
  • -5%

Têtes de coupe quart de rond

Ensemble multiradius R12, R15, R18 et R20 mm Alésage 30 mm

Ref: YS108BZM-30
Corps en alliage léger avec couteaux profilés standard en carbure de tungstène pour un usinage flexible des quarts de rond. Tous les rayons correspondent à une bague de guidage de 105 mm. Corps équipé de couteaux R 15/20 mm. Profils R 12/18 mm inclus. Limitation de l'épaisseur des copeaux et réduction du recul. Convient à l'avance manuelle.
1 en stock
304,60 € -5% 289,37 € 
Fraise diamantée à rainurer en V 90° D30 S20
  • -20%
  • Neuf

Fraises à rainurer en V

Fraise diamantée à rainurer en V 90° D30 S20

Ref: 180.030.15.90
Opération de pliage sur CNC
Pour panneaux de particules et MDF revêtus
Hauteur du losange : 4 mm
MEC
Délai de livraison prévu 1 à 2 semaines
396,00 € -20% 316,80 € 
Glue joint cutter TC ENT 16430 | ENT
  • -20%

cutters pour collage adhésif

Glue joint cutter TC ENT 16430

Ref: ENT-16430
ENT 16430 Glue joint cutter TC for wood thicknesses from 15 to max. 25 mm. with 8 mm shank.
1 en stock
62,00 € -20% 49,60 € 
Guttering cutter R15 S10mm | Titman Tools
  • -15%

Fraises à rayon convexe

Guttering cutter R15 S10mm

Ref: GC15-10
Guttering cutter
En rupture de stock, veuillez vous renseigner sur le délai de livraison
107,00 € -15% 90,95 € 
Half round cutter R8 S12mm | Titman Tools
  • -15%

Emporte-pièces demi-ronds

Half round cutter R8 S12mm

Ref: SBC8-12
Premium Half round cutter
En rupture de stock, veuillez vous renseigner sur le délai de livraison
97,00 € -15% 82,45 € 
Hinge Boring Bit TC 30 mm S8mm ENT 21382 | ENT
  • -20%

Pour fenêtres et portes

Hinge Boring Bit TC 30 mm S8mm ENT 21382

Ref: ent-21382
Hinge boring bit with centre point and two bevelled flutes. Because of their specially designed cutting edges they allow use on high speed machines up to 27000 rpm. Shank without flat for use on routing machines.
1 en stock
30,00 € -20% 24,00 € 
Hinge Mortising Cutter TC 30 mm ENT 13422 | ENT
  • -20%

Fraises à mortaiser

Hinge Mortising Cutter TC 30 mm ENT 13422

Ref: ENT-13422
Specifically designed for cutting in hinges. stair treads and the general routing of larger flat bottom areas
1 en stock
43,00 € -20% 34,40 € 
Multiradius set R12, R15, R18 and R20 mm Bore 35mm | Stark
  • -5%

Têtes de coupe quart de rond

Multiradius set R12, R15, R18 and R20 mm Bore 35mm

Ref: YS108BZM-35
Stark Multiradius set 
Light alloy body with standard tungsten carbide profiled knives for flexible machining of quarterrounds, all radii match a 105 mm guide ring, body is mounted with R 15/20 mm knives, profilesR 12/18 mm are included in the set, chip thickness limitation and reduced recoil, suitable for manualfeed.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
320,00 € -5% 304,00 € 
Multiradius set R12, R15, R18 and R20 mm Bore 50mm | Stark
  • -5%

Têtes de coupe quart de rond

Multiradius set R12, R15, R18 and R20 mm Bore 50mm

Ref: YS108BZM-50
Stark Multiradius set 
Light alloy body with standard tungsten carbide profiled knives for flexible machining of quarterrounds, all radii match a 105 mm guide ring, body is mounted with R 15/20 mm knives, profilesR 12/18 mm are included in the set, chip thickness limitation and reduced recoil, suitable for manualfeed.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
320,00 € -5% 304,00 € 
Panelraising set Bore 40mm | Stark
  • -5%

Porte-outils profil-contre-profil

Panelraising set Bore 40mm

Ref: YS112BZM040
Stark panelraising set
En rupture de stock, veuillez vous renseigner sur le délai de livraison
526,20 € -5% 499,89 € 
Panelraising set Bore 50mm | Stark
  • -5%

Porte-outils profil-contre-profil

Panelraising set Bore 50mm

Ref: YS112BZM050
Stark panelraising set
En rupture de stock, veuillez vous renseigner sur le délai de livraison
557,10 € -5% 529,25 € 
Profile cutter CLT4 | Titman Tools
  • -15%

Fraises profilées

Profile cutter CLT4

Ref: CLT4-8
Profile cutter CLT4
En rupture de stock, veuillez vous renseigner sur le délai de livraison
110,00 € -15% 93,50 € 
Profile mould cutter D30 R9 S12mm | Titman Tools
  • -15%

Emporte-pièces demi-ronds

Profile mould cutter D30 R9 S12mm

Ref: WHC16-12
Profile mould cutter
En rupture de stock, veuillez vous renseigner sur le délai de livraison
125,00 € -15% 106,25 € 
Quarter round cutterhead (R5 included) Bore 1-1/4 inch | Stark
  • -5%

Têtes de coupe quart de rond

Quarter round cutterhead (R5 included) Bore 1-1/4 inch

Ref: TH70TM01031
Steel body with standard tungsten carbide profiled knives for quarter rounds, axial angle for excellentmilling results and reduced cutting pressure
En rupture de stock, veuillez vous renseigner sur le délai de livraison
310,00 € -5% 294,50 € 
quarter round cutterhead (R5 included) Bore 30mm | Stark
  • -5%

Têtes de coupe quart de rond

quarter round cutterhead (R5 included) Bore 30mm

Ref: TH70TM01030
Steel body with standard tungsten carbide profiled knives for quarter rounds, axial angle for excellentmilling results and reduced cutting pressure
En rupture de stock, veuillez vous renseigner sur le délai de livraison
310,00 € -5% 294,50 € 
Quarter round cutterhead (R5 included) Bore 35mm | Stark
  • -5%

Têtes de coupe quart de rond

Quarter round cutterhead (R5 included) Bore 35mm

Ref: TH70TM01035
Steel body with standard tungsten carbide profiled knives for quarter rounds, axial angle for excellentmilling results and reduced cutting pressure
En rupture de stock, veuillez vous renseigner sur le délai de livraison
310,00 € -5% 294,50 € 
Quarter round cutterhead (R5 included) Bore 40mm | Stark
  • -5%

Têtes de coupe quart de rond

Quarter round cutterhead (R5 included) Bore 40mm

Ref: TH70TM01040
Steel body with standard tungsten carbide profiled knives for quarter rounds, axial angle for excellentmilling results and reduced cutting pressure
En rupture de stock, veuillez vous renseigner sur le délai de livraison
310,00 € -5% 294,50 € 
Quarter round cutterhead (R5 included) Bore 50mm | Stark
  • -5%

Têtes de coupe quart de rond

Quarter round cutterhead (R5 included) Bore 50mm

Ref: TH70TM01050
Steel body with standard tungsten carbide profiled knives for quarter rounds, axial angle for excellentmilling results and reduced cutting pressure
En rupture de stock, veuillez vous renseigner sur le délai de livraison
310,00 € -5% 294,50 € 
quarter round cutterhead Bore 30mm (R3. 4. 5. 6. 8 and 10mm included) | Stark
  • -5%

Têtes de coupe quart de rond

quarter round cutterhead Bore 30mm (R3. 4. 5. 6. 8 and 10mm included)

Ref: TH70TM10030
Steel body with standard tungsten carbide profiled knives for quarter rounds, axial angle for excellentmilling results and reduced cutting pressure, different radius can be fitted onto the same tool body, 

R=3, 4, 5, 6, 8 and 10mm included
En rupture de stock, veuillez vous renseigner sur le délai de livraison
499,00 € -5% 474,05 € 
Quarter round cutterhead Bore 31,75mm (1-1/4 inch) (R3. 4. 5. 6. 8 and 10mm included) | Stark
  • -5%

Têtes de coupe quart de rond

Quarter round cutterhead Bore 31,75mm (1-1/4 inch) (R3. 4. 5. 6. 8 and 10mm included)

Ref: TH70TM10031
Steel body with standard tungsten carbide profiled knives for quarter rounds, axial angle for excellentmilling results and reduced cutting pressure, different radius can be fitted onto the same tool body, 

R=3, 4, 5, 6, 8 and 10mm included
En rupture de stock, veuillez vous renseigner sur le délai de livraison
499,00 € -5% 474,05 € 
Quarter round cutterhead Bore 35mm (R3. 4. 5. 6. 8 and 10mm included) | Stark
  • -5%

Têtes de coupe quart de rond

Quarter round cutterhead Bore 35mm (R3. 4. 5. 6. 8 and 10mm included)

Ref: TH70TM10035
Steel body with standard tungsten carbide profiled knives for quarter rounds, axial angle for excellentmilling results and reduced cutting pressure, different radius can be fitted onto the same tool body, 

R=3, 4, 5, 6, 8 and 10mm included
En rupture de stock, veuillez vous renseigner sur le délai de livraison
499,00 € -5% 474,05 € 
Quarter round cutterhead Bore 40mm (R3. 4. 5. 6. 8 and 10mm included) | Stark
  • -5%

Têtes de coupe quart de rond

Quarter round cutterhead Bore 40mm (R3. 4. 5. 6. 8 and 10mm included)

Ref: TH70TM10040
Steel body with standard tungsten carbide profiled knives for quarter rounds, axial angle for excellentmilling results and reduced cutting pressure, different radius can be fitted onto the same tool body, 

R=3, 4, 5, 6, 8 and 10mm included
En rupture de stock, veuillez vous renseigner sur le délai de livraison
499,00 € -5% 474,05 €