Promotions

Filtres actifs

  • Disponibilité :Disponible clear
  • Diamètre de connexion :6mm clear
  • Longueur totale :57mm clear
  • -15%

Coupe-bordure droite pour couper

Guide and trim D6 S6 mm

Ref: GTC6-6
Guide and trim
En rupture de stock, veuillez vous renseigner sur le délai de livraison
55,00 € -15% 46,75 € 
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D3 L12 S6mm

Ref: AC3DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
25,00 € -15% 21,25 € 
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D4 L14 S6mm

Ref: AC4DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
25,00 € -15% 21,25 € 
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D5 L19 S6mm

Ref: AC5DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
25,00 € -15% 21,25 € 
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D6 L19 S6mm

Ref: AC6DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
4 en stock
22,00 € -15% 18,70 € 
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Positiv for Plastics D4 L14 S6mm

Ref: AC5-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
2 en stock
27,00 € -15% 22,95 € 
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Positiv for Plastics D5 L19 S6mm

Ref: AC5-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
27,00 € -15% 22,95 € 
  • -15%

Fraises à rainure droite

Straight bit D5 L16 S6mm

Ref: M516-6
Straight bit shank 6 mm
En rupture de stock, veuillez vous renseigner sur le délai de livraison
37,00 € -15% 31,45 € 
  • -15%

Fraises à rainure droite

Straight bit D6 L23 S6mm

Ref: M623-6
Straight bit shank 6 mm
En rupture de stock, veuillez vous renseigner sur le délai de livraison
39,00 € -15% 33,15 € 
  • -15%

Fraises à bords droits pour canaux

Titman Straight cutter for Plastics D6 L20 S6mm

Ref: AS6-6
Straight cutter for plastic
Suitable for plastics with a low melting point.
In-boring and clockwise rotation
1 en stock
20,00 € -15% 17,00 € 
  • -15%

Fraises à arêtes de coupe axiales

Trimmer D12,7 S6mm with double bearing

Ref: BGT903-6
Bearing guide cutter with three cutting edges for particularly fine milling results.Equipped with two ball bearings to make prints on sensitive workpieces to avoid.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
77,35 € -15% 65,75 € 
  • -15%

Fraises à arêtes de coupe axiales

Trimmer D18 L25 S6mm negative axis angle

Ref: BGT90LKS-6
This results in a particularly clean result with thin coatings and long-fiber funnels.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
51,00 € -15% 43,35 € 
  • -15%

Fraises à arêtes de coupe axiales

Trimmers with bearing D12,7 L25,4 S6mm

Ref: IBGT90LK-6
Bearing guide cutter for trimming protruding veneer and plastic edges. Also possible tocopy using a template. The small diameters are ideal for processing inside corners.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
53,00 € -15% 45,05 € 
  • -15%

Fraises à arêtes de coupe axiales

Trimmers with bearing D9.5 L25,4 S6mm

Ref: IBGT95LK-6
Bearing guide cutter for trimming protruding veneer and plastic edges. Also possible tocopy using a template. The small diameters are ideal for processing inside corners.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
51,00 € -15% 43,35 € 
  • -15%

Cutter à bords droits pour poser les joints de fenêtres et de portes

Weather strip cutter bevel D5 S6mm

Ref: DC5-6
Weather strip cutter bevel
En rupture de stock, veuillez vous renseigner sur le délai de livraison
49,26 € -15% 41,87 €