Promotions

Filtres actifs

  • Longueur de coupe - hauteur :11-22mm clear
  • Longueur de coupe - hauteur :36mm clear
  • Longueur de coupe - hauteur :L1(6,2mm) L2(11mm) clear
  • Longueur de coupe - hauteur :L1(6,2mm) L2(11mm) clear
  • Longueur de coupe - hauteur :L1(14mm) L2(18mm) clear
  • Longueur de coupe - hauteur :L1(35mm) L2(44mm) clear
  • Longueur de coupe - hauteur :L1(35mm) L2(44mm) clear
  • Longueur de coupe - hauteur :L1(35mm) L2(44mm) clear
Double rounding over / chamfer bit adjustable R2.5 45° S8mm | Titman Tools
  • -15%

Fraises à rayon concave

Double rounding over / chamfer bit adjustable R2.5 45° S8mm

Ref: ROS22-8
Cutter for chamfering of material thicknesses from 11 to 22 mm. The cutter isadjusted to the material thickness with the included spacers. By replacing the profile parts. a double rounding cutter is possible.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
129,74 € -15% 110,28 € 
PCD router cutter D10 L36 S10mm Eco-Line Mini Z1+1 with HWM body | Wirutex
  • -20%

Eco-line

PCD router cutter D10 L36 S10mm Eco-Line Mini Z1+1 with HWM body

Ref: ES0213
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
PCD router cutters with HWM body which provides greater resistance to vibrations and makes them less prone to breakage than the Eco-line Mini Z1+1.
Design

PCD tips
Cutting edge head in HWM
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 20 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
En rupture de stock, veuillez vous renseigner sur le délai de livraison
325,00 € -20% 260,00 € 
PCD router cutter D12 L36 S12mm Eco-Line Mini Z1+1 with HWM body | Wirutex
  • -20%

Eco-line

PCD router cutter D12 L36 S12mm Eco-Line Mini Z1+1 with HWM body

Ref: ES0221
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
PCD router cutters with HWM body which provides greater resistance to vibrations and makes them less prone to breakage than the Eco-line Mini Z1+1.
Design

PCD tips
Cutting edge head in HWM
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 20 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
En rupture de stock, veuillez vous renseigner sur le délai de livraison
355,00 € -20% 284,00 € 
V-Groove cutter 45° L1(14) S12mm | Titman Tools
  • -15%

Fraises à encoche en V

V-Groove cutter 45° L1(14) S12mm

Ref: VGC45L-12
These cutters create a straight line of approx. 1 mm at the bottom.
D=38 A=45° L1=19 L2=25 B=25 S=12mm 
1 en stock
91,00 € -15% 77,35 €