Promotions

Filtres actifs

  • Longueur totale :38 mm clear
  • Longueur totale :83mm clear
  • Longueur totale :170mm clear
Fraise diamantée Eco-Line Mini D12 L35 S12mm | Wirutex
  • -20%

Eco-line

Fraise diamantée Eco-Line Mini D12 L35 S12mm

Ref: P03790
Pour le contournage, le perçage et le calibrage de panneaux en aggloméré et MDF, bruts ou revêtus.
 
Conception

Pointes PCD
Pointe de plongée en carbure de tungstène HM
Angle de cisaillement positif et négatif
Zone d'affûtage : 1,0 mm
Vitesse d'avance : jusqu'à 15 m/min
Vitesse de rotation max. : 18 000 – 24 000
Épaisseur minimale du matériau 13 mm
En rupture de stock, veuillez vous renseigner sur le délai de livraison
110,00 € -20% 88,00 € 
Rounding over bit R1 S6mm | Titman Tools
  • -15%

Fraises à rayon concave

Rounding over bit R1 S6mm

Ref: ROCB1-6
Ballbearings diameter 16 mm and 12,7 mm included.
2 en stock
89,72 € -15% 76,26 € 
Rounding over bit R1 S8mm | Titman Tools
  • -15%

Fraises à rayon concave

Rounding over bit R1 S8mm

Ref: ROCB1-8
Ballbearings diameter 16 mm and 12,7 mm included.
1 en stock
89,72 € -15% 76,26 € 
Spiral cutter Negative for Plastics D2 L8 S3mm | Titman Tools
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D2 L8 S3mm

Ref: AC2-3DC
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
15,00 € -15% 12,75 € 
Spiral cutter Negative for Plastics D2,5 L10 S3mm | Titman Tools
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D2,5 L10 S3mm

Ref: AC2.5-3DC
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
17,00 € -15% 14,45 € 
Spiral cutter Positiv for Plastics D2,5 L10 S3mm | Titman Tools
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Positiv for Plastics D2,5 L10 S3mm

Ref: AC2.5-3
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
17,00 € -15% 14,45 € 
Spiral cutter Positiv for Plastics D3 L12 S1/4 inch | Titman Tools
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Positiv for Plastics D3 L12 S1/4 inch

Ref: AC3-1/4
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
12,00 € -15% 10,20 €