Promotions

Filtres actifs

  • Longueur totale :38 mm clear
  • Longueur totale :57mm clear
  • Coupeurs :2 clear
Rounding over bit R1 S6mm | Titman Tools
  • -15%

Fraises à rayon concave

Rounding over bit R1 S6mm

Ref: ROCB1-6
Ballbearings diameter 16 mm and 12,7 mm included.
2 en stock
89,72 € -15% 76,26 € 
Rounding over bit R1 S8mm | Titman Tools
  • -15%

Fraises à rayon concave

Rounding over bit R1 S8mm

Ref: ROCB1-8
Ballbearings diameter 16 mm and 12,7 mm included.
1 en stock
89,72 € -15% 76,26 € 
Spiral cutter Negative for Plastics D2 L8 S3mm | Titman Tools
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D2 L8 S3mm

Ref: AC2-3DC
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
15,00 € -15% 12,75 € 
Spiral cutter Negative for Plastics D2,5 L10 S3mm | Titman Tools
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D2,5 L10 S3mm

Ref: AC2.5-3DC
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
17,00 € -15% 14,45 € 
Spiral cutter Negative for Plastics D3 L12 S6mm | Titman Tools
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D3 L12 S6mm

Ref: AC3DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
25,00 € -15% 21,25 € 
Spiral cutter Negative for Plastics D4 L14 S6mm | Titman Tools
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D4 L14 S6mm

Ref: AC4DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
25,00 € -15% 21,25 € 
Spiral cutter Negative for Plastics D5 L19 S6mm | Titman Tools
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D5 L19 S6mm

Ref: AC5DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
25,00 € -15% 21,25 € 
Spiral cutter Negative for Plastics D6 L19 S6mm | Titman Tools
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D6 L19 S6mm

Ref: AC6DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
4 en stock
22,00 € -15% 18,70 € 
Spiral cutter Positiv for Plastics D2,5 L10 S3mm | Titman Tools
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Positiv for Plastics D2,5 L10 S3mm

Ref: AC2.5-3
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
17,00 € -15% 14,45 € 
Spiral cutter Positiv for Plastics D3 L12 S1/4 inch | Titman Tools
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Positiv for Plastics D3 L12 S1/4 inch

Ref: AC3-1/4
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
12,00 € -15% 10,20 € 
Spiral cutter Positiv for Plastics D4 L14 S6mm | Titman Tools
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Positiv for Plastics D4 L14 S6mm

Ref: AC5-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
2 en stock
27,00 € -15% 22,95 € 
Spiral cutter Positiv for Plastics D5 L19 S6mm | Titman Tools
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Positiv for Plastics D5 L19 S6mm

Ref: AC5-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
27,00 € -15% 22,95 € 
Trimmer D18 L25 S6mm negative axis angle | Titman Tools
  • -15%

Fraises à arêtes de coupe axiales

Trimmer D18 L25 S6mm negative axis angle

Ref: BGT90LKS-6
This results in a particularly clean result with thin coatings and long-fiber funnels.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
51,00 € -15% 43,35 € 
Trimmer D18 L25 S8mm negative axis angle | Titman Tools
  • -15%

Fraises à arêtes de coupe axiales

Trimmer D18 L25 S8mm negative axis angle

Ref: BGT90LKS-8
This results in a particularly clean result with thin coatings and long-fiber funnels.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
51,00 € -15% 43,35 € 
Trimmers with bearing D12,7 L25,4 S6mm | Titman Tools
  • -15%

Fraises à arêtes de coupe axiales

Trimmers with bearing D12,7 L25,4 S6mm

Ref: IBGT90LK-6
Bearing guide cutter for trimming protruding veneer and plastic edges. Also possible tocopy using a template. The small diameters are ideal for processing inside corners.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
53,00 € -15% 45,05 € 
Trimmers with bearing D12,7 L25,4 S8mm | Titman Tools
  • -15%

Fraises à arêtes de coupe axiales

Trimmers with bearing D12,7 L25,4 S8mm

Ref: IBGT90LK-8
Bearing guide cutter for trimming protruding veneer and plastic edges. Also possible tocopy using a template. The small diameters are ideal for processing inside corners.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
53,00 € -15% 45,05 € 
Trimmers with bearing D12,7 S12mm | Titman Tools
  • -15%

Fraises à arêtes de coupe axiales

Trimmers with bearing D12,7 S12mm

Ref: IBGT90-12
Bearing guide cutter for trimming protruding veneer and plastic edges. Also possible tocopy using a template. The small diameters are ideal for processing inside corners.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
52,00 € -15% 44,20 € 
Trimmers with bearing D9.5 L25,4 S6mm | Titman Tools
  • -15%

Fraises à arêtes de coupe axiales

Trimmers with bearing D9.5 L25,4 S6mm

Ref: IBGT95LK-6
Bearing guide cutter for trimming protruding veneer and plastic edges. Also possible tocopy using a template. The small diameters are ideal for processing inside corners.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
51,00 € -15% 43,35 € 
Trimmers with bearing D9.5 L25,4 S8mm | Titman Tools
  • -15%

Fraises à arêtes de coupe axiales

Trimmers with bearing D9.5 L25,4 S8mm

Ref: IBGT95LK-8
Bearing guide cutter for trimming protruding veneer and plastic edges. Also possible tocopy using a template. The small diameters are ideal for processing inside corners.
1 en stock
51,00 € -15% 43,35 €