Promotions

Filtres actifs

  • Longueur totale :44mm clear
  • Longueur totale :57mm clear
  • Coupeurs :2 clear
  • -15%

Fraises à queue d'aronde

Dovetail bit HW D13.5 A13 degrees L12.5 GL44 S8

Ref: DC13.5-8
Dovetail bit HW D=13,5 A=13 degrees L=12,5 GL=44 S=8
En rupture de stock, veuillez vous renseigner sur le délai de livraison
41,73 € -15% 35,47 € 
  • -20%

Fraises à mortaiser

Hinge Mortising Cutter TC 30 mm ENT 13422

Ref: ENT-13422
Specifically designed for cutting in hinges. stair treads and the general routing of larger flat bottom areas
1 en stock
43,00 € -20% 34,40 € 
  • -15%

Fraises à rayon concave

Rounding over cutter R4 S8mm

Ref: OC4-8
Rounding over cutter R4  S8mm
En rupture de stock, veuillez vous renseigner sur le délai de livraison
80,00 € -15% 68,00 € 
  • -15%

Fraises à rayon concave

Rounding over cutter R5 S8mm

Ref: OC5-8
Rounding over cutter R5  S8mm
En rupture de stock, veuillez vous renseigner sur le délai de livraison
80,00 € -15% 68,00 € 
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D3 L12 S6mm

Ref: AC3DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
25,00 € -15% 21,25 € 
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D4 L14 S6mm

Ref: AC4DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
25,00 € -15% 21,25 € 
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D5 L19 S6mm

Ref: AC5DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
25,00 € -15% 21,25 € 
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D6 L19 S6mm

Ref: AC6DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
4 en stock
22,00 € -15% 18,70 € 
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Positiv for Plastics D4 L14 S6mm

Ref: AC5-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
2 en stock
27,00 € -15% 22,95 € 
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Positiv for Plastics D5 L19 S6mm

Ref: AC5-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
27,00 € -15% 22,95 € 
  • -15%

Fraises à arêtes de coupe axiales

Trimmer D18 L25 S6mm negative axis angle

Ref: BGT90LKS-6
This results in a particularly clean result with thin coatings and long-fiber funnels.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
51,00 € -15% 43,35 € 
  • -15%

Fraises à arêtes de coupe axiales

Trimmer D18 L25 S8mm negative axis angle

Ref: BGT90LKS-8
This results in a particularly clean result with thin coatings and long-fiber funnels.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
51,00 € -15% 43,35 € 
  • -15%

Fraises à arêtes de coupe axiales

Trimmers with bearing D12,7 L25,4 S6mm

Ref: IBGT90LK-6
Bearing guide cutter for trimming protruding veneer and plastic edges. Also possible tocopy using a template. The small diameters are ideal for processing inside corners.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
53,00 € -15% 45,05 € 
  • -15%

Fraises à arêtes de coupe axiales

Trimmers with bearing D12,7 L25,4 S8mm

Ref: IBGT90LK-8
Bearing guide cutter for trimming protruding veneer and plastic edges. Also possible tocopy using a template. The small diameters are ideal for processing inside corners.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
53,00 € -15% 45,05 € 
  • -15%

Fraises à arêtes de coupe axiales

Trimmers with bearing D12,7 S12mm

Ref: IBGT90-12
Bearing guide cutter for trimming protruding veneer and plastic edges. Also possible tocopy using a template. The small diameters are ideal for processing inside corners.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
52,00 € -15% 44,20 € 
  • -15%

Fraises à arêtes de coupe axiales

Trimmers with bearing D9.5 L25,4 S6mm

Ref: IBGT95LK-6
Bearing guide cutter for trimming protruding veneer and plastic edges. Also possible tocopy using a template. The small diameters are ideal for processing inside corners.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
51,00 € -15% 43,35 € 
  • -15%

Fraises à arêtes de coupe axiales

Trimmers with bearing D9.5 L25,4 S8mm

Ref: IBGT95LK-8
Bearing guide cutter for trimming protruding veneer and plastic edges. Also possible tocopy using a template. The small diameters are ideal for processing inside corners.
1 en stock
51,00 € -15% 43,35 €