Promotions

Filtres actifs

  • Longueur totale :44mm clear
  • Longueur totale :57mm clear
  • Longueur totale :66mm clear
Arbor for Groovers 6,35mm S8mm | Titman Tools
  • -15%

Coupe-disques

Arbor for Groovers 6,35mm S8mm

Ref: LDTA/8
Arbor inclusive spacers and bearing no. B16 (D = 16).
Suitable for groovers with bore 6,35 mm
1 en stock
30,00 € -15% 25,50 € 
Barley twist cutter BTC2 | Titman Tools
  • -15%

Coupe-tours d'orge

Barley twist cutter BTC2

Ref: BTC2-12
Barley twist cutter BTC2
En rupture de stock, veuillez vous renseigner sur le délai de livraison
127,00 € -15% 107,95 € 
Barley twist cutter BTC6 | Titman Tools
  • -15%

Coupe-tours d'orge

Barley twist cutter BTC6

Ref: BTC6-12
Barley twist cutter BTC6
En rupture de stock, veuillez vous renseigner sur le délai de livraison
127,00 € -15% 107,95 € 
Cove mould cutter R10 S8mm with bearing | Titman Tools
  • -15%

Fraises à rayon convexe

Cove mould cutter R10 S8mm with bearing

Ref: CMC10-8
Cove mould cutter with bearing
En rupture de stock, veuillez vous renseigner sur le délai de livraison
103,00 € -15% 87,55 € 
Cove mould cutter R8 S8mm with bearing | Titman Tools
  • -15%

Fraises à rayon convexe

Cove mould cutter R8 S8mm with bearing

Ref: CMC8-8
Cove mould cutter with bearing
En rupture de stock, veuillez vous renseigner sur le délai de livraison
99,00 € -15% 84,15 € 
Dovetail bit HW D13.5 A13 degrees L12.5 GL44 S8 | Titman Tools
  • -15%

Fraises à queue d'aronde

Dovetail bit HW D13.5 A13 degrees L12.5 GL44 S8

Ref: DC13.5-8
Dovetail bit HW D=13,5 A=13 degrees L=12,5 GL=44 S=8
En rupture de stock, veuillez vous renseigner sur le délai de livraison
41,73 € -15% 35,47 € 
Guide and trim D6 S6 mm | Titman Tools
  • -15%

Coupe-bordure droite pour couper

Guide and trim D6 S6 mm

Ref: GTC6-6
Guide and trim
En rupture de stock, veuillez vous renseigner sur le délai de livraison
55,00 € -15% 46,75 € 
Hinge Mortising Cutter TC 30 mm ENT 13422 | ENT
  • -20%

Fraises à mortaiser

Hinge Mortising Cutter TC 30 mm ENT 13422

Ref: ENT-13422
Specifically designed for cutting in hinges. stair treads and the general routing of larger flat bottom areas
1 en stock
43,00 € -20% 34,40 € 
Profile cutter TRC19 | Titman Tools
  • -15%

Fraises profilées

Profile cutter TRC19

Ref: TRC19-6
Profile cutter TRC19
En rupture de stock, veuillez vous renseigner sur le délai de livraison
82,00 € -15% 69,70 € 
Rounding over cutter R4 S8mm | Titman Tools
  • -15%

Fraises à rayon concave

Rounding over cutter R4 S8mm

Ref: OC4-8
Rounding over cutter R4  S8mm
En rupture de stock, veuillez vous renseigner sur le délai de livraison
80,00 € -15% 68,00 € 
Rounding over cutter R5 S8mm | Titman Tools
  • -15%

Fraises à rayon concave

Rounding over cutter R5 S8mm

Ref: OC5-8
Rounding over cutter R5  S8mm
En rupture de stock, veuillez vous renseigner sur le délai de livraison
80,00 € -15% 68,00 € 
Spiral cutter Negative for Plastics D3 L12 S6mm | Titman Tools
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D3 L12 S6mm

Ref: AC3DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
25,00 € -15% 21,25 € 
Spiral cutter Negative for Plastics D4 L14 S6mm | Titman Tools
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D4 L14 S6mm

Ref: AC4DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
25,00 € -15% 21,25 € 
Spiral cutter Negative for Plastics D5 L19 S6mm | Titman Tools
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D5 L19 S6mm

Ref: AC5DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
25,00 € -15% 21,25 € 
Spiral cutter Negative for Plastics D6 L19 S6mm | Titman Tools
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D6 L19 S6mm

Ref: AC6DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
4 en stock
22,00 € -15% 18,70 € 
Spiral cutter Negative for Plastics D8 L25 S8mm | Titman Tools
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D8 L25 S8mm

Ref: AC8DC-8
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
35,00 € -15% 29,75 € 
Spiral cutter Positiv for Plastics D4 L14 S6mm | Titman Tools
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Positiv for Plastics D4 L14 S6mm

Ref: AC5-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
2 en stock
27,00 € -15% 22,95 €