Promotions

Filtres actifs

  • Longueur totale :57mm clear
  • Longueur totale :83mm clear
  • Longueur totale :125 mm clear
Arbor for Groovers 6,35mm S8mm | Titman Tools
  • -15%

Coupe-disques

Arbor for Groovers 6,35mm S8mm

Ref: LDTA/8
Arbor inclusive spacers and bearing no. B16 (D = 16).
Suitable for groovers with bore 6,35 mm
1 en stock
30,00 € -15% 25,50 € 
Barley twist cutter BTC2 | Titman Tools
  • -15%

Coupe-tours d'orge

Barley twist cutter BTC2

Ref: BTC2-12
Barley twist cutter BTC2
En rupture de stock, veuillez vous renseigner sur le délai de livraison
127,00 € -15% 107,95 € 
Barley twist cutter BTC6 | Titman Tools
  • -15%

Coupe-tours d'orge

Barley twist cutter BTC6

Ref: BTC6-12
Barley twist cutter BTC6
En rupture de stock, veuillez vous renseigner sur le délai de livraison
127,00 € -15% 107,95 € 
Cove mould cutter R10 S8mm with bearing | Titman Tools
  • -15%

Fraises à rayon convexe

Cove mould cutter R10 S8mm with bearing

Ref: CMC10-8
Cove mould cutter with bearing
En rupture de stock, veuillez vous renseigner sur le délai de livraison
103,00 € -15% 87,55 € 
Cove mould cutter R8 S8mm with bearing | Titman Tools
  • -15%

Fraises à rayon convexe

Cove mould cutter R8 S8mm with bearing

Ref: CMC8-8
Cove mould cutter with bearing
En rupture de stock, veuillez vous renseigner sur le délai de livraison
99,00 € -15% 84,15 € 
Fraise diamantée Eco-Line Mini D12 L35 S12mm | Wirutex
  • -20%

Eco-line

Fraise diamantée Eco-Line Mini D12 L35 S12mm

Ref: P03790
Pour le contournage, le perçage et le calibrage de panneaux en aggloméré et MDF, bruts ou revêtus.
 
Conception

Pointes PCD
Pointe de plongée en carbure de tungstène HM
Angle de cisaillement positif et négatif
Zone d'affûtage : 1,0 mm
Vitesse d'avance : jusqu'à 15 m/min
Vitesse de rotation max. : 18 000 – 24 000
Épaisseur minimale du matériau 13 mm
En rupture de stock, veuillez vous renseigner sur le délai de livraison
110,00 € -20% 88,00 € 
Guide and trim D6 S6 mm | Titman Tools
  • -15%

Coupe-bordure droite pour couper

Guide and trim D6 S6 mm

Ref: GTC6-6
Guide and trim
En rupture de stock, veuillez vous renseigner sur le délai de livraison
55,00 € -15% 46,75 € 
PCD Diamond straight router bit 20mm L65 S20mm | JVL Tools
  • -20%

Eco-line

PCD Diamond straight router bit 20mm L65 S20mm

Ref: 900.20.65.20
PCD straight router bit bottom cutting.
Suitable for milling wood. MDF. chipboard. plastics. veneer. melamine and hi-macs
1 en stock
169,26 € -20% 135,41 € 
Spiral cutter Negative for Plastics D3 L12 S6mm | Titman Tools
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D3 L12 S6mm

Ref: AC3DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
25,00 € -15% 21,25 € 
Spiral cutter Negative for Plastics D4 L14 S6mm | Titman Tools
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D4 L14 S6mm

Ref: AC4DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
25,00 € -15% 21,25 € 
Spiral cutter Negative for Plastics D5 L19 S6mm | Titman Tools
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D5 L19 S6mm

Ref: AC5DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
25,00 € -15% 21,25 € 
Spiral cutter Negative for Plastics D6 L19 S6mm | Titman Tools
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D6 L19 S6mm

Ref: AC6DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
4 en stock
22,00 € -15% 18,70 € 
Spiral cutter Positiv for Plastics D4 L14 S6mm | Titman Tools
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Positiv for Plastics D4 L14 S6mm

Ref: AC5-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
2 en stock
27,00 € -15% 22,95 € 
Spiral cutter Positiv for Plastics D5 L19 S6mm | Titman Tools
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Positiv for Plastics D5 L19 S6mm

Ref: AC5-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
27,00 € -15% 22,95 € 
Straight bit 10mm L25 S8mm | Titman Tools
  • -15%

Fraises à rainure droite

Straight bit 10mm L25 S8mm

Ref: M1025-8
Straight bit shank 8mm
En rupture de stock, veuillez vous renseigner sur le délai de livraison
48,00 € -15% 40,80 € 
Straight bit 20mm L25 S8mm | Titman Tools
  • -15%

Fraises à rainure droite

Straight bit 20mm L25 S8mm

Ref: M2025-8
Straight bit shank 8mm
2 en stock
67,74 € -15% 57,58 € 
Straight bit 5mm L20 S8mm | Titman Tools
  • -15%

Fraises à rainure droite

Straight bit 5mm L20 S8mm

Ref: M520-8
Straight bit shank 8mm
En rupture de stock, veuillez vous renseigner sur le délai de livraison
38,00 € -15% 32,30 € 
Straight bit 6mm L23 S8mm | Titman Tools
  • -15%

Fraises à rainure droite

Straight bit 6mm L23 S8mm

Ref: M623-8
Straight bit shank 8mm
En rupture de stock, veuillez vous renseigner sur le délai de livraison
38,00 € -15% 32,30 €