Offerte

Filtri attivi

  • Diametro (D):24mm clear
  • Diametro (D):147mm clear
  • Diametro (D):D(15mm) d(8mm) clear
  • Diametro (D):D(20mm) d(14mm) clear
Multiradius set R12, R15, R18 and R20 mm Bore 35mm | Stark
  • -5%

Teste di taglio a quarto di giro

Multiradius set R12, R15, R18 and R20 mm Bore 35mm

Ref: YS108BZM-35
Stark Multiradius set 
Light alloy body with standard tungsten carbide profiled knives for flexible machining of quarterrounds, all radii match a 105 mm guide ring, body is mounted with R 15/20 mm knives, profilesR 12/18 mm are included in the set, chip thickness limitation and reduced recoil, suitable for manualfeed.
Esaurito, si prega di chiedere informazioni sui tempi di consegna
320,00 € -5% 304,00 € 
Multiradius set R12, R15, R18 and R20 mm Bore 50mm | Stark
  • -5%

Teste di taglio a quarto di giro

Multiradius set R12, R15, R18 and R20 mm Bore 50mm

Ref: YS108BZM-50
Stark Multiradius set 
Light alloy body with standard tungsten carbide profiled knives for flexible machining of quarterrounds, all radii match a 105 mm guide ring, body is mounted with R 15/20 mm knives, profilesR 12/18 mm are included in the set, chip thickness limitation and reduced recoil, suitable for manualfeed.
Esaurito, si prega di chiedere informazioni sui tempi di consegna
320,00 € -5% 304,00 € 
Panelraising set Bore 40mm | Stark
  • -5%

Testa portacoltelli profilo-controprofilo

Panelraising set Bore 40mm

Ref: YS112BZM040
Stark panelraising set
Esaurito, si prega di chiedere informazioni sui tempi di consegna
526,20 € -5% 499,89 € 
Panelraising set Bore 50mm | Stark
  • -5%

Testa portacoltelli profilo-controprofilo

Panelraising set Bore 50mm

Ref: YS112BZM050
Stark panelraising set
Esaurito, si prega di chiedere informazioni sui tempi di consegna
557,10 € -5% 529,25 € 
Quarter round cutterhead (R5 included) Bore 1-1/4 inch | Stark
  • -5%

Teste di taglio a quarto di giro

Quarter round cutterhead (R5 included) Bore 1-1/4 inch

Ref: TH70TM01031
Steel body with standard tungsten carbide profiled knives for quarter rounds, axial angle for excellentmilling results and reduced cutting pressure
Esaurito, si prega di chiedere informazioni sui tempi di consegna
310,00 € -5% 294,50 € 
quarter round cutterhead (R5 included) Bore 30mm | Stark
  • -5%

Teste di taglio a quarto di giro

quarter round cutterhead (R5 included) Bore 30mm

Ref: TH70TM01030
Steel body with standard tungsten carbide profiled knives for quarter rounds, axial angle for excellentmilling results and reduced cutting pressure
Esaurito, si prega di chiedere informazioni sui tempi di consegna
310,00 € -5% 294,50 € 
Quarter round cutterhead (R5 included) Bore 35mm | Stark
  • -5%

Teste di taglio a quarto di giro

Quarter round cutterhead (R5 included) Bore 35mm

Ref: TH70TM01035
Steel body with standard tungsten carbide profiled knives for quarter rounds, axial angle for excellentmilling results and reduced cutting pressure
Esaurito, si prega di chiedere informazioni sui tempi di consegna
310,00 € -5% 294,50 € 
Quarter round cutterhead (R5 included) Bore 40mm | Stark
  • -5%

Teste di taglio a quarto di giro

Quarter round cutterhead (R5 included) Bore 40mm

Ref: TH70TM01040
Steel body with standard tungsten carbide profiled knives for quarter rounds, axial angle for excellentmilling results and reduced cutting pressure
Esaurito, si prega di chiedere informazioni sui tempi di consegna
310,00 € -5% 294,50 € 
Quarter round cutterhead (R5 included) Bore 50mm | Stark
  • -5%

Teste di taglio a quarto di giro

Quarter round cutterhead (R5 included) Bore 50mm

Ref: TH70TM01050
Steel body with standard tungsten carbide profiled knives for quarter rounds, axial angle for excellentmilling results and reduced cutting pressure
Esaurito, si prega di chiedere informazioni sui tempi di consegna
310,00 € -5% 294,50 € 
quarter round cutterhead Bore 30mm (R3. 4. 5. 6. 8 and 10mm included) | Stark
  • -5%

Teste di taglio a quarto di giro

quarter round cutterhead Bore 30mm (R3. 4. 5. 6. 8 and 10mm included)

Ref: TH70TM10030
Steel body with standard tungsten carbide profiled knives for quarter rounds, axial angle for excellentmilling results and reduced cutting pressure, different radius can be fitted onto the same tool body, 

R=3, 4, 5, 6, 8 and 10mm included
Esaurito, si prega di chiedere informazioni sui tempi di consegna
499,00 € -5% 474,05 € 
Quarter round cutterhead Bore 31,75mm (1-1/4 inch) (R3. 4. 5. 6. 8 and 10mm included) | Stark
  • -5%

Teste di taglio a quarto di giro

Quarter round cutterhead Bore 31,75mm (1-1/4 inch) (R3. 4. 5. 6. 8 and 10mm included)

Ref: TH70TM10031
Steel body with standard tungsten carbide profiled knives for quarter rounds, axial angle for excellentmilling results and reduced cutting pressure, different radius can be fitted onto the same tool body, 

R=3, 4, 5, 6, 8 and 10mm included
Esaurito, si prega di chiedere informazioni sui tempi di consegna
499,00 € -5% 474,05 € 
Quarter round cutterhead Bore 35mm (R3. 4. 5. 6. 8 and 10mm included) | Stark
  • -5%

Teste di taglio a quarto di giro

Quarter round cutterhead Bore 35mm (R3. 4. 5. 6. 8 and 10mm included)

Ref: TH70TM10035
Steel body with standard tungsten carbide profiled knives for quarter rounds, axial angle for excellentmilling results and reduced cutting pressure, different radius can be fitted onto the same tool body, 

R=3, 4, 5, 6, 8 and 10mm included
Esaurito, si prega di chiedere informazioni sui tempi di consegna
499,00 € -5% 474,05 € 
Quarter round cutterhead Bore 40mm (R3. 4. 5. 6. 8 and 10mm included) | Stark
  • -5%

Teste di taglio a quarto di giro

Quarter round cutterhead Bore 40mm (R3. 4. 5. 6. 8 and 10mm included)

Ref: TH70TM10040
Steel body with standard tungsten carbide profiled knives for quarter rounds, axial angle for excellentmilling results and reduced cutting pressure, different radius can be fitted onto the same tool body, 

R=3, 4, 5, 6, 8 and 10mm included
Esaurito, si prega di chiedere informazioni sui tempi di consegna
499,00 € -5% 474,05 € 
Quarter round cutterhead Bore 50mm (R3. 4. 5. 6. 8 and 10mm included) | Stark
  • -5%

Teste di taglio a quarto di giro

Quarter round cutterhead Bore 50mm (R3. 4. 5. 6. 8 and 10mm included)

Ref: TH70TM10050
Steel body with standard tungsten carbide profiled knives for quarter rounds, axial angle for excellentmilling results and reduced cutting pressure, different radius can be fitted onto the same tool body, 

R=3, 4, 5, 6, 8 and 10mm included
Esaurito, si prega di chiedere informazioni sui tempi di consegna
499,00 € -5% 474,05 € 
Replacement tip Straight bit D24 L30 S12mm Z2 | Titman Tools
  • -15%

Frese Punte per scanalature dritte

Replacement tip Straight bit D24 L30 S12mm Z2

Ref: M2430-12RT
Replacement tip Straight bit Z=2 Shank 12 mm
Esaurito, si prega di chiedere informazioni sui tempi di consegna
184,00 € -15% 156,40 € 
Replacement tip Straight bit D24 L50 S12mm Z2 | Titman Tools
  • -15%

Frese Punte per scanalature dritte

Replacement tip Straight bit D24 L50 S12mm Z2

Ref: M2450-12RT
Replacement tip Straight bit Z=2 Shank 12 mm
Esaurito, si prega di chiedere informazioni sui tempi di consegna
216,00 € -15% 183,60 € 
Replacement tip straight cutter D24 L30 M10x1.5 Z2 | Titman Tools
  • -15%

Frese Punte per scanalature dritte

Replacement tip straight cutter D24 L30 M10x1.5 Z2

Ref: M2430-M10RT
Replacement tip straight cutter internal thread M12x1
Esaurito, si prega di chiedere informazioni sui tempi di consegna
188,00 € -15% 159,80 € 
Replacement tip straight cutter D24 L30 M12x1 Z2 | Titman Tools
  • -15%

Frese Punte per scanalature dritte

Replacement tip straight cutter D24 L30 M12x1 Z2

Ref: M2430-M12RT
Replacement tip straight cutter internal thread M12x1
Esaurito, si prega di chiedere informazioni sui tempi di consegna
188,00 € -15% 159,80 € 
Replacement tip straight cutter D24 L50 M10x1.5 Z2 | Titman Tools
  • -15%

Frese Punte per scanalature dritte

Replacement tip straight cutter D24 L50 M10x1.5 Z2

Ref: M2450-M10RT
Replacement tip straight cutter internal thread M12x1
Esaurito, si prega di chiedere informazioni sui tempi di consegna
216,00 € -15% 183,60 € 
Replacement tip straight cutter D24 L50 M12x1 Z2 | Titman Tools
  • -15%

Frese Punte per scanalature dritte

Replacement tip straight cutter D24 L50 M12x1 Z2

Ref: M2450-M12RT
Replacement tip straight cutter internal thread M12x1
Esaurito, si prega di chiedere informazioni sui tempi di consegna
216,00 € -15% 183,60 € 
Rounding over bit R4 S8mm | Titman Tools
  • -15%

Frese a raggio concavo

Rounding over bit R4 S8mm

Ref: ROCB4-8
Ballbearings diameter 16 mm and 12,7 mm included.
1 in magazzino
89,56 € -15% 76,13 € 
Rounding over bit R5 S8mm | Titman Tools
  • -15%

Frese a raggio concavo

Rounding over bit R5 S8mm

Ref: ROCB5-8
Ballbearings diameter 16 mm and 12,7 mm included.
2 in magazzino
90,88 € -15% 77,25 € 
Rounding over cutter with extended cutting edge R3 L11 S6mm | Titman Tools
  • -15%

Frese a raggio concavo

Rounding over cutter with extended cutting edge R3 L11 S6mm

Ref: SROCB3-6
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Esaurito, si prega di chiedere informazioni sui tempi di consegna
71,32 € -15% 60,62 € 
Rounding over cutter with extended cutting edge R3 L11 S8mm | Titman Tools
  • -15%

Frese a raggio concavo

Rounding over cutter with extended cutting edge R3 L11 S8mm

Ref: SROCB3-8
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
1 in magazzino
72,00 € -15% 61,20 € 
Multiradius set R12, R15, R18 and R20 mm Bore 30mm | Stark
  • -5%

Teste di taglio a quarto di giro

Set multiraggio R12, R15, R18 e R20 mm Alesaggio 30mm

Ref: YS108BZM-30
Corpo in lega leggera con coltelli profilati standard in carburo di tungsteno per la lavorazione flessibile di quarti di tondo, tutti i raggi corrispondono a un anello di guida da 105 mm, il corpo è montato con coltelli R 15/20 mm, i profili R 12/18 mm sono inclusi nel set, limitazione dello spessore del truciolo e rinculo ridotto, adatto per avanzamento manuale.
1 in magazzino
304,60 € -5% 289,37 € 
Sinking cutter for solid surface | Titman Tools
  • -15%

Per materiali compositi

Sinking cutter for solid surface

Ref: XC206-12
For milling a shadow gap or water surge at the basin and water drainage channels on the sink.
Suitable for

Corian
Hi-Macs
Staron
Avonite
Hanex
Varicor
domovari
1 in magazzino
69,96 € -15% 59,47 €