Finger pull Cutter shank 8 mm
Finger pull Cutters
Finger pull Cutters
- -10%
- -10%
Filter By
Availability
Bore
Outside diameter
Thickness
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
Extensive program Professional routers for a perfect result.
There are 478 products.
Active filters
Finger pull Cutters
Finger pull Cutters
PCD Diamond grooving cutter Z=1 Positive
PCD Diamond grooving cutter Z=1 Positive
PCD Diamond grooving cutter Z=1 Negative
PCD Diamond grooving cutter Z=1 Negative
Cutter combination for milling grooves for flashover seals....
Cutter combination for milling grooves for flashover seals. Suitable for seals from: Schlegel QL-3434, QL-3070Deventer SV33, SP33, DS6677Trelleborg/Dipro L2020, L5019, L5020, L8003Goll AFK2615
Replacement tip rebate cutter with bearing
Replacement tip rebate cutter with bearing
PCD Diamond grooving cutter Z=1 Negative
PCD Diamond grooving cutter Z=1 Negative
For contouring, boring and sizing panels in chipboard and MDF,...
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Cutter combination for milling grooves for flashover seals....
Cutter combination for milling grooves for flashover seals. Suitable for seals from: Schlegel QL-3434, QL-3070Deventer SV33, SP33, DS6677Trelleborg/Dipro L2020, L5019, L5020, L8003Goll AFK2615
Raised panel cutter RPC5
Raised panel cutter RPC5
D19 L30 S8mm Replacement tip trimmers with bearing top and bottom
D19 L30 S8mm Replacement tip trimmers with bearing top and bottom
Replacement tip Straight bit Z=2 S=8
Replacement tip Straight bit Z=2 S=8
Replacement tip Straight bit Z=2 S=8
Replacement tip Straight bit Z=2 S=8
PCD Diamond grooving cutter Z=1 Positive
PCD Diamond grooving cutter Z=1 Positive
PCD Diamond grooving cutter Z=1 Negative
PCD Diamond grooving cutter Z=1 Negative
Cutter combination for milling grooves for flashover seals.
Cutter combination for milling grooves for flashover seals.
for simultaneous machining of top and bottom edges.
for simultaneous machining of top and bottom edges.
For contouring, boring and sizing panels in chipboard and MDF,...
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.