- Home
-
- Router bits
- Cutters For woodworking
- Rounding over bits
- Straight bits
- Surface trimming bits
- Flute & bead bit
- Chamfering bits
- Dovetail bits
- Flush trim bit
- Stepped rebate bit
- Spiral bits
- Pattern bit / Top bearing straight bits
- Slotting cutters
- Staff / corner bead bit
- V-Groove Bits
- Weatherseal bits
- T-Slot cutter
- Finger pull cutters / Handrail cutter
- Cove bit
- Tongue and groove cutters
- Rebate Cutters
- Raised panel cutters
- Barley twist cutter
- Profile cutter
- Glue joint cutter
- Router bits For corian / HIMACS
- Router bits for plastics
- Router bits / endmills for metal
- Router bits For Aluminum, ALUCOBOND, DiBOND, REYNOBOND
- Window and door tooling
- Diamond router bits - PCD
- Parts
- Collets and accessories
- Cutters For woodworking
- Cutterheads
- Replaceable knives
- Saw blades
- Drills
- Bearings
- Inner diameter up to 10mm
- Inner diameter 1,5mm
- Inner diameter 2mm
- Inner diameter 2,38mm - 3/32 inch
- Inner diameter 2,5mm
- Inner diameter 3mm
- inner diameter 3,17mm - 1/8 inch
- Inner diameter 4mm
- Inner diameter 4,75mm - 3/16 inch
- inner diameter 5mm
- Inner diameter 6mm
- Inner diameter 6,35mm - 1/4 inch
- Inner diameter 7mm
- Inner diameter 7,94mm - 5/16 inch
- Inner diameter 8mm
- Inner diameter 9mm
- Inner diameter 9,52mm - 3/8 inch
- Inner diameter from 10 to 20mm
- Inner diameter 20mm and larger
- Inner diameter up to 10mm
- Virutex
- Machines
- Accessories
- Consumables
- Spare Parts
- AB11C Parts
- AB111N Parts
- AB181 Parts
- AG98 parts
- AP98 Parts
- Parts for CE machines
- Parts for EB machines
- FC116U Parts
- FC16S Parts
- FP192VB Parts
- Parts for FR machines
- LB31E Parts
- LRE46L Parts
- LRT84H Parts
- M75 Parts
- O81 N Parts
- PEB50, PEB250 Parts
- RA17 Parts
- RTE46L Parts
- Parts for TM machines
- RZ170N Parts
- RZ70M Parts
- Other parts
- Other products
- Sale
- Router bits
Filter By
Availability
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
Router bits
Extensive program Professional routers for a perfect result.
There are 49 products.
Straight Cutter TC Z1 HM...
ENT Straight Cutter TC / One Flute with 8 mm shank
ENT Straight Cutter TC / One Flute with 8 mm shank
Straight Cutter TC HM Z1 D5...
ENT Straight Cutter TC / One Flute with 8 mm shank
ENT Straight Cutter TC / One Flute with 8 mm shank
Straight Cutter TC Z1 D6 S8mm
ENT Straight Cutter TC / One Flute with 8 mm shank
ENT Straight Cutter TC / One Flute with 8 mm shank
Straight Cutter TC Z1 D3...
ENT Straight Cutter TC / One Flute with 8 mm shank
ENT Straight Cutter TC / One Flute with 8 mm shank
RV 8,0x63
Suitable for: Steel, Stainless steel, Cast iron, Aluminum and...
Suitable for: Steel, Stainless steel, Cast iron, Aluminum and copper
Spiral cutter Negative for...
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
- -10%
- -10%
Spiral cutter Negative for...
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
- -10%
- -10%
Spiral cutter Positiv for...
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
- -10%
- -10%
ENT Dovetail cutter TC 14°...
ENT two flute dovetail cutter without spurs. with 8 mm shank.
ENT two flute dovetail cutter without spurs. with 8 mm shank.
Dovetail Cutter 14° 14.3 x...
ENT 15966 Dovetail Cutter 14° 14.3 x 12.7 mm with 8 mm shank
ENT 15966 Dovetail Cutter 14° 14.3 x 12.7 mm with 8 mm shank
ENT trimming cutter TC 6 x...
ENT trimming cutter TC 6 x 19 x 64 mm with 8mm shank
ENT trimming cutter TC 6 x 19 x 64 mm with 8mm shank
ENT trimming cutter TC 19 x...
ENT trimming cutter TC 19 x 19 x 62 mm with 8mm shank
ENT trimming cutter TC 19 x 19 x 62 mm with 8mm shank
Single flute cutter D8 S12...
Single flute cutter Z=1 for solid surface Suitable for...
Single flute cutter Z=1 for solid surface Suitable for Corian Hi-Macs Staron Avonite Hanex Varicor domovari
- -10%
- -10%
Single flute cutter Z2...
Single flute cutter Z=2 Negative for solid surface
Single flute cutter Z=2 Negative for solid surface
- -10%
- -10%
Trimmers with bearing...
Bearing guide cutter for trimming protruding veneer and...
Bearing guide cutter for trimming protruding veneer and plastic edges. Also possible tocopy using a template. The small diameters are ideal for processing inside corners.
- -10%
- -10%
Trimmers with bearing...
Trimmers with bearing
Trimmers with bearing
- -10%
- -10%
Single flute cutter 12,7mm...
Single flute cutter Z=1 for solid surface
Single flute cutter Z=1 for solid surface
- -10%
- -10%
Single flute cutter 10mm...
Single flute cutter Z=1 for solid surface
Single flute cutter Z=1 for solid surface
- -10%
- -10%
Single flute cutter Z2...
Single flute cutter Z=2 Negative for solid surface
Single flute cutter Z=2 Negative for solid surface
- -10%
- -10%
Bearing guide trimmer D6.35...
Bearing guide trimmer Z2 for solid surface Suitable for...
Bearing guide trimmer Z2 for solid surface Suitable for Corian Hi-Macs Staron Avonite Hanex Varicor domovari
- -10%
- -10%
Trimmers with bearing D9.5...
Trimmers with bearing
Trimmers with bearing
- -10%
- -10%
Trimmers with bearing D9.5...
Trimmers with bearing
Trimmers with bearing
- -10%
- -10%
ENT trimming cutter top...
Bottom cutting. suitable for plunge. With 8 mm shank
Bottom cutting. suitable for plunge. With 8 mm shank
Profile guide cutter D12,7...
Trimming cutter with bearing on shank for scanning overhead...
Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.
- -10%
- -10%
Profile guide cutter D12,7...
Trimming cutter with bearing on shank for scanning overhead...
Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.
- -10%
- -10%
Bearing guide trimmer D12,7...
Bearing guide trimmer double bearing for solid surface
Bearing guide trimmer double bearing for solid surface
- -10%
- -10%