Router bits

Diameter 31.8mm R 9.5mm

Diameter 31.8mm R 9.5mm

JVL pro-line rounding over bit 31.8mm

JVL pro-line rounding over bit 31.8mm

Spiral finishing cutter upcut Z2

Spiral finishing cutter upcut Z2

Spiral finishing cutter downcut Z2

Spiral finishing cutter downcut Z2

Two flute solid carbide spiral bit 5 mm with 8 mm shank....

Two flute solid carbide spiral bit 5 mm with 8 mm shank. Positive (upcut) spiral.

Two flute ogee cutter with exchangeable ball bearing and 8mm...

Two flute ogee cutter with exchangeable ball bearing and 8mm shank

Rounding over cutter R10 S=10mm

Rounding over cutter R10 S=10mm

Rounding over cutter with guide pin shank 8 mm

Rounding over cutter with guide pin shank 8 mm

Rounding over cutter R10  S8mm

Rounding over cutter R10  S8mm

Straight bit shank 12 mm

Straight bit shank 12 mm

Straight cutter internal thread M10x1.5

Straight cutter internal thread M10x1.5

Straight bit shank 12 mm

Straight bit shank 12 mm

Two flutes. With exchangeable ball bearing. The set combines a...

Two flutes. With exchangeable ball bearing. The set combines a profile cutter and a slotter. Both on a bearing mounted arbor. Stile and rail are produced by reversing the cutter parts. For woodthickness from 19 to 21 mm

Straight bit shank 12 mm

Straight bit shank 12 mm

Two flutes. With exchangeable ball bearing. The set combines a...

Two flutes. With exchangeable ball bearing. The set combines a profile cutter and a slotter. Both on a bearing mounted arbor. Stile and rail are produced by reversing the cutter parts. For woodthickness from 19 to 21 mm

ENT 17440 Rail- & Stile Cutter Chamfer TC. Type  A with 8...

ENT 17440 Rail- & Stile Cutter Chamfer TC. Type  A with 8 mm shank.  For woodthickness from 19 to 21 mm

Profile cutter RBB

Profile cutter RBB

Two flutes. With exchangeable ball bearing. The set combines a...

Two flutes. With exchangeable ball bearing. The set combines a profile cutter and a slotter. Both on a bearing mounted arbor. Stile and rail are produced by reversing the cutter parts. For woodthickness from 19 to 21 mm

Replacement tip bearing guide cutter. For coated boards, solid...

Replacement tip bearing guide cutter. For coated boards, solid wood and wood-basedmaterials

Pattern bit with replaceable knives L60/4 Z=2 D=19 L=60 S=12

Pattern bit with replaceable knives L60/4 Z=2 D=19 L=60 S=12