Router bits

JVL Rounding over router bit R 7.9 mm with 8mm shank

JVL Rounding over router bit R 7.9 mm with 8mm shank

ENT 13821 Chamfer cutter 45 degrees with ball bearing and 8...

ENT 13821 Chamfer cutter 45 degrees with ball bearing and 8 mm shank

ENT 13801 Chamfer cutter 45 degrees with ball bearing and 6...

ENT 13801 Chamfer cutter 45 degrees with ball bearing and 6 mm shank

For chamfering thin sheets, plywood, acrylic, etc. For...

For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.

V-Groove cutter

V-Groove cutter

Bevel cutter with real center cutting edge for direct...

Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.

Bevel cutter with bearing

Bevel cutter with bearing

Straight bit shank 8mm

Straight bit shank 8mm

V-Groove cutter

V-Groove cutter

Profile cutter BCC8

Profile cutter BCC8

Bevel cutter with bearing for solid surface

Bevel cutter with bearing for solid surface

Cove mould cutter with bearing

Cove mould cutter with bearing

Straight bit shank 12 mm

Straight bit shank 12 mm

Diamond PCD rounding over bit Shank 8 mm

Diamond PCD rounding over bit Shank 8 mm

T-Slot cutter with radius

T-Slot cutter with radius

Titman Staff / corner bead HW Z=2 D=28,7 L=23 R=6,3 S=8

Titman Staff / corner bead HW Z=2 D=28,7 L=23 R=6,3 S=8

Diamond PCD rounding over bit Shank 8 mm

Diamond PCD rounding over bit Shank 8 mm

Profile mould cutter

Profile mould cutter

The following items are required to create the appropriate...

The following items are required to create the appropriate groove:Groover G36552-6.35 and arbor LDTA/8