JVL pro-line roundnose bit...
JVL pro-line roundnose bit D 19 mm
JVL pro-line roundnose bit D 19 mm
Filter By
Availability
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
Extensive program Professional routers for a perfect result.
There are 40 products.
JVL pro-line roundnose bit D 19 mm
JVL pro-line roundnose bit D 19 mm
JVL pro-line rounding over bit 31.8mm
JVL pro-line rounding over bit 31.8mm
Suitable for: Steel, Stainless steel, Cast iron, aluminum,...
Suitable for: Steel, Stainless steel, Cast iron, aluminum, copper and plastics
EPROCUT Rounding over bit HW Z=2 D=31,7 R=9,5 L=16 GL=48 S=8
EPROCUT Rounding over bit HW Z=2 D=31,7 R=9,5 L=16 GL=48 S=8
Ball nose Spiral cutter Z1 Positive - Upcut for Plastics...
Ball nose Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Ball nose Spiral cutter Z1 Positive - Upcut for Plastics...
Ball nose Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Radius engraving cutter These double-edged cutters create a...
Radius engraving cutter These double-edged cutters create a flat of approx. 1 mm at the bottom.
Rounding over cutter with bearing for solid surface materials
Rounding over cutter with bearing for solid surface materials
Rounding over cutter R3 S=8mm
Rounding over cutter R3 S=8mm
Rounding over cutter R3 S=-6mm
Rounding over cutter R3 S=-6mm
Rounding over cutter with guide pin shank 8 mm
Rounding over cutter with guide pin shank 8 mm
Titman flute bit R=3 S=8
Titman flute bit R=3 S=8
Cove mould cutter with bearing
Cove mould cutter with bearing
Titman rounding over cutter R3 S8
Titman rounding over cutter R3 S8
Rounding and formatting cutterR3 S=8mm
Rounding and formatting cutterR3 S=8mm
Cove mould cutter for solid surface
Cove mould cutter for solid surface