Filter By
Availability
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
Extensive program Professional routers for a perfect result.
Single flute cutter Z=1 for solid surface Suitable for...
Single flute cutter Z=1 for solid surface Suitable for Corian Hi-Macs Staron Avonite Hanex Varicor domovari
Keyhole bit HW Z=1 D=9.5 C=10 L=4.5 d=4.5 S=8
Keyhole bit HW Z=1 D=9.5 C=10 L=4.5 d=4.5 S=8
Single flute cutter Z=2 Negative for solid surface
Single flute cutter Z=2 Negative for solid surface
Single flute cutter Z=1 for solid surface
Single flute cutter Z=1 for solid surface
Single flute cutter Z=1 for solid surface
Single flute cutter Z=1 for solid surface
Keyhole bit HW Z=1 D=9.5 C=10 L=4.5 d=4.5 S=6mm
Keyhole bit HW Z=1 D=9.5 C=10 L=4.5 d=4.5 S=6mm
Keyhole bit HW D=12,7 mm S=8
Keyhole bit HW D=12,7 mm S=8
Ballbearings diameter 16 mm and 12,7 mm included.
Ballbearings diameter 16 mm and 12,7 mm included.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Titman rounding cutter D=16,3 L=9 R=4 d=6,35 S=8
Titman rounding cutter D=16,3 L=9 R=4 d=6,35 S=8
Replacement tip bearing guide cutter. For coated boards, solid...
Replacement tip bearing guide cutter. For coated boards, solid wood and wood-basedmaterials
Ballbearings diameter 16 mm and 12,7 mm included.
Ballbearings diameter 16 mm and 12,7 mm included.
Cove mould cutter for solid surface
Cove mould cutter for solid surface
Bearing guide cutter with three cutting edges for particularly...
Bearing guide cutter with three cutting edges for particularly fine milling results.Equipped with two ball bearings to make prints on sensitive workpieces to avoid.
