- Home
-
- Router bits
- Cutters For woodworking
- Rounding over bits
- Straight bits
- Surface trimming bits
- Flute & bead bit
- Chamfering bits
- Dovetail bits
- Flush trim bit
- Stepped rebate bit
- Spiral bits
- Pattern bit / Top bearing straight bits
- Slotting cutters
- Staff / corner bead bit
- V-Groove Bits
- Weatherseal bits
- T-Slot cutter
- Finger pull cutters / Handrail cutter
- Cove bit
- Tongue and groove cutters
- Rebate Cutters
- Raised panel cutters
- Barley twist cutter
- Profile cutter
- Glue joint cutter
- Router bits For corian / HIMACS
- Router bits for plastics
- Router bits / endmills for metal
- Router bits For Aluminum, ALUCOBOND, DiBOND, REYNOBOND
- Window and door tooling
- Diamond router bits - PCD
- Parts
- Collets and accessories
- Cutters For woodworking
- Cutterheads
- Replaceable knives
- Saw blades
- Drills
- Bearings
- Inner diameter up to 10mm
- Inner diameter 1,5mm
- Inner diameter 2mm
- Inner diameter 2,38mm - 3/32 inch
- Inner diameter 2,5mm
- Inner diameter 3mm
- inner diameter 3,17mm - 1/8 inch
- Inner diameter 4mm
- Inner diameter 4,75mm - 3/16 inch
- inner diameter 5mm
- Inner diameter 6mm
- Inner diameter 6,35mm - 1/4 inch
- Inner diameter 7mm
- Inner diameter 7,94mm - 5/16 inch
- Inner diameter 8mm
- Inner diameter 9mm
- Inner diameter 9,52mm - 3/8 inch
- Inner diameter from 10 to 20mm
- Inner diameter 20mm and larger
- Inner diameter up to 10mm
- Virutex
- Machines
- Accessories
- Consumables
- Spare Parts
- AB11C Parts
- AB111N Parts
- AB181 Parts
- AG98 parts
- AP98 Parts
- Parts for CE machines
- Parts for EB machines
- FC116U Parts
- FC16S Parts
- FP192VB Parts
- Parts for FR machines
- LB31E Parts
- LRE46L Parts
- LRT84H Parts
- M75 Parts
- O81 N Parts
- PEB50, PEB250 Parts
- RA17 Parts
- RTE46L Parts
- Parts for TM machines
- RZ170N Parts
- RZ70M Parts
- Other parts
- Other products
- Sale
- Router bits
Filter By
Availability
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
Router bits
Extensive program Professional routers for a perfect result.
There are 23 products.
Spiral cutter Positiv for...
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
- -10%
- -10%
Spiral cutter Negative for...
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
- -10%
- -10%
Spiral cutter Negative for...
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
- -10%
- -10%
Spiral cutter Positiv for...
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
- -10%
- -10%
Spiral cutter Positiv for...
Solid carbide milling cutters for plastic processing,...
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation
- -10%
- -10%
Single flute cutter D10...
Single flute cutter with neck for plastic and aluminium
Single flute cutter with neck for plastic and aluminium
- -10%
- -10%
Straight bit D12 L50 S12mm
Straight bit shank 12 mm
Straight bit shank 12 mm
- -10%
- -10%
Bevel cutter with beveled...
For edging sinks and vanity bowls. The special taper on the...
For edging sinks and vanity bowls. The special taper on the Bearing sleeve allows for perfect guide following around the inside of the bowl.
- -10%
- -10%
PCD Diamond straight router...
PCD Diamond straight router bit bottom cutting
PCD Diamond straight router bit bottom cutting
Bevel cutter 6° with...
For edging sinks and vanity bowls. The special taper on the...
For edging sinks and vanity bowls. The special taper on the Bearing sleeve allows for perfect guide following around the inside of the bowl.
- -10%
- -10%
Bevel cutter 15° S12mm...
Bevel cutter with bearing for solid surface
Bevel cutter with bearing for solid surface
- -10%
- -10%
Straight cutter D18 L60...
Straight cutter internal thread M10x1.5
Straight cutter internal thread M10x1.5
- -10%
- -10%
PCD Diamond straight router...
PCD Diamond straight router bit bottom cutting
PCD Diamond straight router bit bottom cutting
PCD Diamond straight router...
PCD Diamond straight router bit bottom cutting
PCD Diamond straight router bit bottom cutting
Trimmers with bearing...
Trimmers with bearing
Trimmers with bearing
- -10%
- -10%
Bevel cutter 45° S12mm...
Bevel cutter with bearing for solid surface
Bevel cutter with bearing for solid surface
- -10%
- -10%
Rounding over cutter R19...
Rounding over cutter with bearing for solid surface materials
Rounding over cutter with bearing for solid surface materials
- -10%
- -10%
Bevel cutter R3,5 7°...
Bevel cutter with beveled bearing for solid surface
Bevel cutter with beveled bearing for solid surface
- -10%
- -10%
Bevel cutter R12,7 15°...
Bevel cutter with beveled bearing for solid surface Suitable...
Bevel cutter with beveled bearing for solid surface Suitable for Corian Hi-Macs Staron Avonite Hanex Varicor domovari
- -10%
- -10%
Nesting ECO Z3+1 16x35 S16mm
For CNC machines For Cabinet nesting Machinig operations on...
For CNC machines For Cabinet nesting Machinig operations on MDF and melamine DP plunging Tip Sharpening area 2.0 mm heavy metal body Feed speed up to 20m/min
- -20%
- -20%