Cutterheads

This set was designed to produce a variety of concave and...

This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.

Stark Adjustable grooving 160 x 4-7,5 Z=4 V=4

Stark Adjustable grooving 160 x 4-7,5 Z=4 V=4

Stark Adjustable grooving 160 x 4-7,5 Z=4 V=4

Stark Adjustable grooving 160 x 4-7,5 Z=4 V=4

Stark Adjustable grooving 160 x 4-7,5 Z=4 V=4

Stark Adjustable grooving 160 x 4-7,5 Z=4 V=4

Stark Adjustable grooving 160 x 4-7,5 Z=4 V=4

Stark Adjustable grooving 160 x 4-7,5 Z=4 V=4

Stark Adjustable grooving 160 x 4-7,5 Z=4 V=4

Stark Adjustable grooving 160 x 4-7,5 Z=4 V=4

This set was designed to produce a variety of concave and...

This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.

This set was designed to produce a variety of concave and...

This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.

This set was designed to produce a variety of concave and...

This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.

This set was designed to produce a variety of concave and...

This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.

Stark Adjustable grooving TYPE A - 140X4-7,5 Z=4 V=4

Stark Adjustable grooving TYPE A - 140X4-7,5 Z=4 V=4

Stark Adjustable grooving TYPE A - 140X4-7,5 Z=4 V=4

Stark Adjustable grooving TYPE A - 140X4-7,5 Z=4 V=4

Adjustable groove cutter TYPE A - 160 x 4-7,5 Z=4 V=4

Adjustable groove cutter TYPE A - 160 x 4-7,5 Z=4 V=4

Adjustable groove cutter TYPE A - 160 x 4-7,5 Z=4 V=4

Adjustable groove cutter TYPE A - 160 x 4-7,5 Z=4 V=4

Cutterhead with HW reversible knives and spurs for making thin...

Cutterhead with HW reversible knives and spurs for making thin precision grooves , adjustable by means of spacing rings. Spacing rings are included.

Cutterhead with HW reversible knives and spurs for making thin...

Cutterhead with HW reversible knives and spurs for making thin precision grooves , adjustable by means of spacing rings. Spacing rings are included.

Cutterhead with HW reversible knives and spurs for making thin...

Cutterhead with HW reversible knives and spurs for making thin precision grooves , adjustable by means of spacing rings. Spacing rings are included.

Cutterhead with HW reversible knives and spurs for making thin...

Cutterhead with HW reversible knives and spurs for making thin precision grooves , adjustable by means of spacing rings. Spacing rings are included.

Cutterhead with HW reversible knives and spurs for making thin...

Cutterhead with HW reversible knives and spurs for making thin precision grooves , adjustable by means of spacing rings. Spacing rings are included.

Cutterhead with steel body mounted on threaded bush. tungsten...

Cutterhead with steel body mounted on threaded bush. tungsten carbide standard reversible knives and spurs. 1/10 mm stepless adjustability for high precision groove cutting. chip thickness limitation and reduced recoil. suitable for manual feed.

Cutterhead with steel body mounted on threaded bush. tungsten...

Cutterhead with steel body mounted on threaded bush. tungsten carbide standard reversible knives and spurs. 1/10 mm stepless adjustability for high precision groove cutting. chip thickness limitation and reduced recoil. suitable for manual feed.

Cutterhead with steel body mounted on threaded bush. tungsten...

Cutterhead with steel body mounted on threaded bush. tungsten carbide standard reversible knives and spurs. 1/10 mm stepless adjustability for high precision groove cutting. chip thickness limitation and reduced recoil. suitable for manual feed.