Grooving cutter TYPE B -...
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 140X7,65 Z=2
- -15%
- -15%
Filter By
Availability
Bore
Diameter (D)
Cutting length/height:
Radius / Angle
Cutterheads
There are 11 products.
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 160x7,65 mm Z=2
grooving cutter TYPE B - 160x7,65 mm Z=2
grooving cutter TYPE B - 160x7,65 mm Z=2
grooving cutter TYPE B - 160x7,65 mm Z=2
Cutterhead with HW reversible knives and spurs for making thin...
Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm. can be combined with Type A milling head with the same diameter and bore.
Cutterhead with HW reversible knives and spurs for making thin...
Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm. can be combined with Type A milling head with the same diameter and bore.
Cutterhead with HW reversible knives and spurs for making thin...
Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm. can be combined with Type A milling head with the same diameter and bore.
Cutterhead with HW reversible knives and spurs for making thin...
Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm. can be combined with Type A milling head with the same diameter and bore.
Cutterhead with HW reversible knives and spurs for making thin...
Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm. can be combined with Type A milling head with the same diameter and bore.
LOW-NOISE 30° degrees pre-milling cutter 80x48x30+2KN...
LOW-NOISE 30° degrees pre-milling cutter 80x48x30+2KN CCEN350128
Cutterheads