Home

Stark Adjustable grooving 160 x 4-7,5 Z=4 V=4

Stark Adjustable grooving 160 x 4-7,5 Z=4 V=4

Half round set (R = 8-9-10 included)

Half round set (R = 8-9-10 included)

Cutterhead with HW reversible knives and spurs for making...

Cutterhead with HW reversible knives and spurs for making precision grooves.

Mitre joint cutterhead 45 degrees

Mitre joint cutterhead 45 degrees

Stark rebate cutter steel body 150 x 50 mm

Stark rebate cutter steel body 150 x 50 mm

Steel body with standard tungsten carbide profiled knives for...

Steel body with standard tungsten carbide profiled knives for quarter rounds, axial angle for excellentmilling results and reduced cutting pressure

Negative alternate tooth end cutting saw blade 140x3.6x30+4...

Negative alternate tooth end cutting saw blade 140x3.6x30+4 Z=20+4 N3401N0464 STREAM - OMNIA. VERSIONS UP UNTIL DECEMBER 2016. Machiningoperations on supported and plastic edges. HW tips. Negative alternate tooth -20°. End cutting of glued edges. Max.rpm:12,000

Cutterhead with HW reversible knives and spurs on both sides...

Cutterhead with HW reversible knives and spurs on both sides rebating and edging. Suitable for solid soft wood, chipboard, veneered and laminated panels, plywood, etc.

Stark Adjustable grooving TYPE A - 140X4-7,5 Z=4 V=4

Stark Adjustable grooving TYPE A - 140X4-7,5 Z=4 V=4

Cutterhead with steel body, tungsten carbide standard...

Cutterhead with steel body, tungsten carbide standard reversible knives and spurs, adjustable with 1/10 mm spacing rings (included) for high precision groove cutting,

for high precision groove cutting, chip thickness limitation...

for high precision groove cutting, chip thickness limitation and reduced recoil, suitable for manual and mechanical feed.

Kitchen cabinet set

Kitchen cabinet set

Steel body. standard tungsten carbide profiled knives for...

Steel body. standard tungsten carbide profiled knives for milling hardwood and softwood. chip thicknesslimitation and reduced recoil. suitable for both manual and mechanical feed.

Steel body with tungsten carbide profiled knives, for high...

Steel body with tungsten carbide profiled knives, for high precision panel raising

Steel body with tungsten carbide profiled knives, for high...

Steel body with tungsten carbide profiled knives, for high precision panel raising,

adjustable grooving TYPE A - 160x 12,4 -24 mm

adjustable grooving TYPE A - 160x 12,4 -24 mm

adjustable cutterhead for tenons 200 x 8-15 mm Z=4 V=4

adjustable cutterhead for tenons 200 x 8-15 mm Z=4 V=4

Steel body, standard tungsten carbide profiled knives for...

Steel body, standard tungsten carbide profiled knives for milling hardwood and softwood, chip thicknesslimitation and reduced recoil, suitable for both manual and mechanical feed.

Stark adjustable cutterhead for tenons 250x8-15 TH06TM10

Stark adjustable cutterhead for tenons 250x8-15 TH06TM10

Stark cutterhead variable angle 160mm

Stark cutterhead variable angle 160mm

Stark adjustable grooving TYPE A - 160 x 16-30 mm

Stark adjustable grooving TYPE A - 160 x 16-30 mm

Adjustable grooving cutter TYPE A + B - 140 x 4-15 mm Z=4+2 V=4

Adjustable grooving cutter TYPE A + B - 140 x 4-15 mm Z=4+2 V=4

YS118 Bore 30mm.    Cutterset consisting of two elements in...

YS118 Bore 30mm.    Cutterset consisting of two elements in light alloy execution. standard tungsten carbide reversible knives.for high precision planning and chamfering/rounding in one single working operation. adjustable formilling solid wood and all types of board material from 18-50 mm...

Cutterhead with HW reversible knives and spurs for making thin...

Cutterhead with HW reversible knives and spurs for making thin precision grooves , adjustable by means of spacing rings. Spacing rings are included.

YS112AZM Set consisting of 2 profile cutters in light alloy...

YS112AZM Set consisting of 2 profile cutters in light alloy execution and an adjustable groover 8-15 mm (can also be used seperately!). for machining door profiles and counterprofiles with maximum flexibility. 5 different profiles can be mounted on the same cutterhead.set complete with spacing...

Cutterhead with steel body mounted on threaded bush. tungsten...

Cutterhead with steel body mounted on threaded bush. tungsten carbide standard reversible knives and spurs. 1/10 mm stepless adjustability for high precision groove cutting. chip thickness limitation and reduced recoil. suitable for manual feed.

adjustable Grooving set TYPE A + B - 160 x 8-28 mm Z=4+2 V=4

adjustable Grooving set TYPE A + B - 160 x 8-28 mm Z=4+2 V=4

Steel body with standard tungsten carbide profiled knives for...

Steel body with standard tungsten carbide profiled knives for quarter rounds, axial angle for excellentmilling results and reduced cutting pressure, different radius can be fitted onto the same tool body,  R=3, 4, 5, 6, 8 and 10mm included

Tongue and groove tooling set Stark YS113AZM

Tongue and groove tooling set Stark YS113AZM