- Home
-
- Router bits
- Cutters For woodworking
- Rounding over bits
- Straight bits
- Surface trimming bits
- Flute & bead bit
- Chamfering bits
- Dovetail bits
- Flush trim bit
- Stepped rebate bit
- Spiral bits
- Pattern bit / Top bearing straight bits
- Slotting cutters
- Staff / corner bead bit
- V-Groove Bits
- Weatherseal bits
- T-Slot cutter
- Finger pull cutters / Handrail cutter
- Cove bit
- Tongue and groove cutters
- Rebate Cutters
- Raised panel cutters
- Barley twist cutter
- Profile cutter
- Glue joint cutter
- Router bits For corian / HIMACS
- Router bits for plastics
- Router bits / endmills for metal
- Router bits For Aluminum, ALUCOBOND, DiBOND, REYNOBOND
- Window and door tooling
- Diamond router bits - PCD
- Parts
- Collets and accessories
- Cutters For woodworking
- Cutterheads
- Replaceable knives
- Saw blades
- Drills
- Bearings
- Inner diameter up to 10mm
- Inner diameter 1,5mm
- Inner diameter 2mm
- Inner diameter 2,38mm - 3/32 inch
- Inner diameter 2,5mm
- Inner diameter 3mm
- inner diameter 3,17mm - 1/8 inch
- Inner diameter 4mm
- Inner diameter 4,75mm - 3/16 inch
- inner diameter 5mm
- Inner diameter 6mm
- Inner diameter 6,35mm - 1/4 inch
- Inner diameter 7mm
- Inner diameter 7,94mm - 5/16 inch
- Inner diameter 8mm
- Inner diameter 9mm
- Inner diameter 9,52mm - 3/8 inch
- Inner diameter from 10 to 20mm
- Inner diameter 20mm and larger
- Inner diameter up to 10mm
- Virutex
- Machines
- Accessories
- Consumables
- Spare Parts
- AB11C Parts
- AB111N Parts
- AB181 Parts
- AG98 parts
- AP98 Parts
- Parts for CE machines
- Parts for EB machines
- FC116U Parts
- FC16S Parts
- FP192VB Parts
- Parts for FR machines
- LB31E Parts
- LRE46L Parts
- LRT84H Parts
- M75 Parts
- O81 N Parts
- PEB50, PEB250 Parts
- RA17 Parts
- RTE46L Parts
- Parts for TM machines
- RZ170N Parts
- RZ70M Parts
- Other parts
- Other products
- Sale
- Router bits
Filter By
Availability
Bore
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
Home
There are 116 products.
Active filters
- Cutting length/height:: 20mm
Bevel cutter 45° S12mm...
Bevel cutter with bearing for solid surface
Bevel cutter with bearing for solid surface
- -10%
- -10%
Titman flute bit R12 S12mm
Titman flute bit HW Z=2 D=32 R=12 L=20 GL=60 S=12
Titman flute bit HW Z=2 D=32 R=12 L=20 GL=60 S=12
- -10%
- -10%
PCD Diamond grooving cutter...
PCD Diamond grooving cutter Z=1 Positive
PCD Diamond grooving cutter Z=1 Positive
Straight bit D50 L20 S12mm
Straight bit shank 12 mm
Straight bit shank 12 mm
- -10%
- -10%
Straight bit Z2 D19 L20 S12
Straight bit Z=2 D=19 L=20 S=12
Straight bit Z=2 D=19 L=20 S=12
- -10%
- -10%
PCD Diamond grooving cutter...
PCD Diamond grooving cutter Z=1 Negative
PCD Diamond grooving cutter Z=1 Negative
Replacement tip rebate...
Replacement tip rebate cutter with bearing
Replacement tip rebate cutter with bearing
- -10%
- -10%
Tilted trimmer with...
Tilted trimmer with interchangeable knives 70x20x16+2KN...
Tilted trimmer with interchangeable knives 70x20x16+2KN N3401N0430 For RI-501 fine trimming unit
- -20%
- -20%
PCD router cutter D8 S8mm...
For contouring, boring and sizing panels in chipboard and MDF,...
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
- -20%
- -20%
Bevel cutter R3,5 7°...
Bevel cutter with beveled bearing for solid surface
Bevel cutter with beveled bearing for solid surface
- -10%
- -10%
Bevel cutter R12,7 15°...
Bevel cutter with beveled bearing for solid surface Suitable...
Bevel cutter with beveled bearing for solid surface Suitable for Corian Hi-Macs Staron Avonite Hanex Varicor domovari
- -10%
- -10%
PCD router cutter D10...
For contouring, boring and sizing panels in chipboard and MDF,...
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
- -20%
- -20%
Optional cutterhead no. 5...
Optional cutterhead no. 5 for YS133AZM 138X20X30 Z=2+2
Optional cutterhead no. 5 for YS133AZM 138X20X30 Z=2+2
- -15%
- -15%
Optional cutterhead no. 5...
Optional cutterhead no. 5 for YS133AZM 138X20X30 Z=2+2
Optional cutterhead no. 5 for YS133AZM 138X20X30 Z=2+2
- -15%
- -15%
Optional cutterhead no. 5...
Optional cutterhead no. 5 for YS133AZM 138X20X30 Z=2+2
Optional cutterhead no. 5 for YS133AZM 138X20X30 Z=2+2
- -15%
- -15%
PCD router cutter D12...
For contouring, boring and sizing panels in chipboard and MDF,...
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
- -20%
- -20%
Optional cutterhead no. 6...
Optional cutterhead no. 6 for YS113AZM 138X20 Z=2+2
Optional cutterhead no. 6 for YS113AZM 138X20 Z=2+2
- -15%
- -15%
Optional cutterhead no. 6...
Optional cutterhead no. 6 for YS113AZM 138X20 Z=2+2
Optional cutterhead no. 6 for YS113AZM 138X20 Z=2+2
- -15%
- -15%
Optional cutterhead no. 6...
Optional cutterhead no. 6 for YS113AZM 138X20 Z=2+2
Optional cutterhead no. 6 for YS113AZM 138X20 Z=2+2
- -15%
- -15%
Quarter round cutterhead...
Steel body with standard tungsten carbide profiled knives for...
Steel body with standard tungsten carbide profiled knives for quarter rounds, axial angle for excellentmilling results and reduced cutting pressure
- -15%
- -15%
Quarter round cutterhead...
Steel body with standard tungsten carbide profiled knives for...
Steel body with standard tungsten carbide profiled knives for quarter rounds, axial angle for excellentmilling results and reduced cutting pressure
- -15%
- -15%
Quarter round cutterhead...
Steel body with standard tungsten carbide profiled knives for...
Steel body with standard tungsten carbide profiled knives for quarter rounds, axial angle for excellentmilling results and reduced cutting pressure
- -15%
- -15%
Quarter round cutterhead...
Steel body with standard tungsten carbide profiled knives for...
Steel body with standard tungsten carbide profiled knives for quarter rounds, axial angle for excellentmilling results and reduced cutting pressure
- -15%
- -15%
quarter round cutterhead...
Steel body with standard tungsten carbide profiled knives for...
Steel body with standard tungsten carbide profiled knives for quarter rounds, axial angle for excellentmilling results and reduced cutting pressure
- -15%
- -15%