- Home
-
- Router bits
- Cutters For woodworking
- Rounding over bits
- Straight bits
- Surface trimming bits
- Flute & bead bit
- Chamfering bits
- Dovetail bits
- Flush trim bit
- Stepped rebate bit
- Spiral bits
- Pattern bit / Top bearing straight bits
- Slotting cutters
- Staff / corner bead bit
- V-Groove Bits
- Weatherseal bits
- T-Slot cutter
- Finger pull cutters / Handrail cutter
- Cove bit
- Tongue and groove cutters
- Rebate Cutters
- Raised panel cutters
- Barley twist cutter
- Profile cutter
- Glue joint cutter
- Router bits For corian / HIMACS
- Router bits for plastics
- Router bits / endmills for metal
- Router bits For Aluminum, ALUCOBOND, DiBOND, REYNOBOND
- Window and door tooling
- Diamond router bits - PCD
- Parts
- Collets and accessories
- Cutters For woodworking
- Cutterheads
- Replaceable knives
- Saw blades
- Drills
- Bearings
- Inner diameter up to 10mm
- Inner diameter 1,5mm
- Inner diameter 2mm
- Inner diameter 2,38mm - 3/32 inch
- Inner diameter 2,5mm
- Inner diameter 3mm
- inner diameter 3,17mm - 1/8 inch
- Inner diameter 4mm
- Inner diameter 4,75mm - 3/16 inch
- inner diameter 5mm
- Inner diameter 6mm
- Inner diameter 6,35mm - 1/4 inch
- Inner diameter 7mm
- Inner diameter 7,94mm - 5/16 inch
- Inner diameter 8mm
- Inner diameter 9mm
- Inner diameter 9,52mm - 3/8 inch
- Inner diameter from 10 to 20mm
- Inner diameter 20mm and larger
- Inner diameter up to 10mm
- Virutex
- Machines
- Accessories
- Consumables
- Spare Parts
- AB11C Parts
- AB111N Parts
- AB181 Parts
- AG98 parts
- AP98 Parts
- Parts for CE machines
- Parts for EB machines
- FC116U Parts
- FC16S Parts
- FP192VB Parts
- Parts for FR machines
- LB31E Parts
- LRE46L Parts
- LRT84H Parts
- M75 Parts
- O81 N Parts
- PEB50, PEB250 Parts
- RA17 Parts
- RTE46L Parts
- Parts for TM machines
- RZ170N Parts
- RZ70M Parts
- Other parts
- Other products
- Sale
- Router bits
Filter By
Availability
Bore
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
Home
There are 20 products.
JVL pro-line rounding over...
JVL pro-line rounding over bit 31.8mm
JVL pro-line rounding over bit 31.8mm
Spiral finishing cutter D5...
Spiral finishing cutter upcut Z2
Spiral finishing cutter upcut Z2
- -10%
- -10%
Spiral finishing cutter D5...
Spiral finishing cutter downcut Z2
Spiral finishing cutter downcut Z2
- -10%
- -10%
Spiral bit solid carbide 5...
Two flute solid carbide spiral bit 5 mm with 8 mm shank....
Two flute solid carbide spiral bit 5 mm with 8 mm shank. Positive (upcut) spiral.
Ogee Cutter TC with Ball...
Two flute ogee cutter with exchangeable ball bearing and 8mm...
Two flute ogee cutter with exchangeable ball bearing and 8mm shank
Rounding over cutter R10...
Rounding over cutter R10 S=10mm
Rounding over cutter R10 S=10mm
- -10%
- -10%
Rounding over cutter D29...
Rounding over cutter with guide pin shank 8 mm
Rounding over cutter with guide pin shank 8 mm
- -10%
- -10%
Rounding over cutter R10 S8mm
Rounding over cutter R10 S8mm
Rounding over cutter R10 S8mm
- -10%
- -10%
Rail- & Stile Cutter...
Two flutes. With exchangeable ball bearing. The set combines a...
Two flutes. With exchangeable ball bearing. The set combines a profile cutter and a slotter. Both on a bearing mounted arbor. Stile and rail are produced by reversing the cutter parts. For woodthickness from 19 to 21 mm
Rail- & Stile Cutter...
Two flutes. With exchangeable ball bearing. The set combines a...
Two flutes. With exchangeable ball bearing. The set combines a profile cutter and a slotter. Both on a bearing mounted arbor. Stile and rail are produced by reversing the cutter parts. For woodthickness from 19 to 21 mm
Rail- & Stile Cutter...
ENT 17440 Rail- & Stile Cutter Chamfer TC. Type A with 8...
ENT 17440 Rail- & Stile Cutter Chamfer TC. Type A with 8 mm shank. For woodthickness from 19 to 21 mm
Rail- & Stile Cutter...
Two flutes. With exchangeable ball bearing. The set combines a...
Two flutes. With exchangeable ball bearing. The set combines a profile cutter and a slotter. Both on a bearing mounted arbor. Stile and rail are produced by reversing the cutter parts. For woodthickness from 19 to 21 mm
Adjustable grooving TYPE A...
adjustable grooving TYPE A - 160x 12,4 -24 mm
adjustable grooving TYPE A - 160x 12,4 -24 mm
- -15%
- -15%
adjustable grooving TYPE A...
adjustable grooving TYPE A - 160x 12,4 -24 mm
adjustable grooving TYPE A - 160x 12,4 -24 mm
- -15%
- -15%
adjustable grooving TYPE A...
adjustable grooving TYPE A - 160x 12,4 -24 mm
adjustable grooving TYPE A - 160x 12,4 -24 mm
- -15%
- -15%
adjustable grooving TYPE A...
adjustable grooving TYPE A - 160x 12,4 -24 mm
adjustable grooving TYPE A - 160x 12,4 -24 mm
- -15%
- -15%
adjustable grooving TYPE A...
adjustable grooving TYPE A - 160x 12,4 -24 mm
adjustable grooving TYPE A - 160x 12,4 -24 mm
- -15%
- -15%