Straight Cutter TC Z1 HM...
ENT Straight Cutter TC / One Flute with 8 mm shank
ENT Straight Cutter TC / One Flute with 8 mm shank
Filter By
Availability
Bore
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 77 products.
ENT Straight Cutter TC / One Flute with 8 mm shank
ENT Straight Cutter TC / One Flute with 8 mm shank
ENT Straight Cutter TC / One Flute with 8 mm shank
ENT Straight Cutter TC / One Flute with 8 mm shank
ENT Straight Cutter TC / One Flute with 8 mm shank
ENT Straight Cutter TC / One Flute with 8 mm shank
ENT two flute dovetail cutter without spurs. with 8 mm shank.
ENT two flute dovetail cutter without spurs. with 8 mm shank.
ENT 15966 Dovetail Cutter 14° 14.3 x 12.7 mm with 8 mm shank
ENT 15966 Dovetail Cutter 14° 14.3 x 12.7 mm with 8 mm shank
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
Bearing guide cutter for trimming protruding veneer and...
Bearing guide cutter for trimming protruding veneer and plastic edges. Also possible tocopy using a template. The small diameters are ideal for processing inside corners.
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Rebate cutter with bearing
Rebate cutter with bearing
ENT 16690 Rebate Cutter TC with Set of Ball Bearings 34.9 mm...
ENT 16690 Rebate Cutter TC with Set of Ball Bearings 34.9 mm with 8 mm shank
Straight bit shank 12 mm
Straight bit shank 12 mm
Trimming Cutter TC with Shear Cutting Angle and 12 mm shank...
Trimming Cutter TC with Shear Cutting Angle and 12 mm shank ENT 13465
Inlay cutter for solid surface
Inlay cutter for solid surface
Cove mould cutter with bearing
Cove mould cutter with bearing
Cove mould cutter with bearing
Cove mould cutter with bearing
Straight bit shank 12 mm
Straight bit shank 12 mm
Cove mould cutter with bearing
Cove mould cutter with bearing
Rebate cutter with bearing
Rebate cutter with bearing
Trimmers with bearing top and bottom
Trimmers with bearing top and bottom
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimming cutter with bearing on shank for scanning overhead...
Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.