Home

ENT Straight Cutter TC / One Flute with 8 mm shank

ENT Straight Cutter TC / One Flute with 8 mm shank

ENT Straight Cutter TC / One Flute with 8 mm shank

ENT Straight Cutter TC / One Flute with 8 mm shank

ENT Straight Cutter TC / One Flute with 8 mm shank

ENT Straight Cutter TC / One Flute with 8 mm shank

ENT two flute dovetail cutter without spurs. with 8 mm shank.

ENT two flute dovetail cutter without spurs. with 8 mm shank.

ENT 15966 Dovetail Cutter 14°  14.3 x 12.7 mm with 8 mm shank

ENT 15966 Dovetail Cutter 14°  14.3 x 12.7 mm with 8 mm shank

Shank 8 mm

Shank 8 mm

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

V-Groove cutter

V-Groove cutter

V-Groove cutter

V-Groove cutter

V-Groove cutter

V-Groove cutter

Dovetail bit Z=2 D=10 A=10° L=9 GL=45 S=8

Dovetail bit Z=2 D=10 A=10° L=9 GL=45 S=8

Bearing guide cutter for trimming protruding veneer and...

Bearing guide cutter for trimming protruding veneer and plastic edges. Also possible tocopy using a template. The small diameters are ideal for processing inside corners.

Trimmers with bearing

Trimmers with bearing

Profile guide cutter with bearing on shank

Profile guide cutter with bearing on shank

ENT 13821 Chamfer cutter 45 degrees with ball bearing and 8...

ENT 13821 Chamfer cutter 45 degrees with ball bearing and 8 mm shank

Trimmers with bearing

Trimmers with bearing

Trimmers with bearing

Trimmers with bearing

Guttering cutter

Guttering cutter

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rebate cutter with bearing

Rebate cutter with bearing

Titman rounding cutter D=16,3 L=9 R=4 d=6,35 S=8

Titman rounding cutter D=16,3 L=9 R=4 d=6,35 S=8

ENT 16690 Rebate Cutter TC with Set of Ball Bearings 34.9 mm...

ENT 16690 Rebate Cutter TC with Set of Ball Bearings 34.9 mm with 8 mm shank

Rounding over cutter with bearing for solid surface materials

Rounding over cutter with bearing for solid surface materials

Inlay cutter for solid surface

Inlay cutter for solid surface

Cove mould cutter with bearing

Cove mould cutter with bearing

Cove mould cutter with bearing

Cove mould cutter with bearing

Titman flute bit R=4 S=8

Titman flute bit R=4 S=8

Profile cutter PCC22

Profile cutter PCC22

Cove mould cutter with bearing

Cove mould cutter with bearing