Home

JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank

JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank

JVL pro-line roundnose bit D 19 mm

JVL pro-line roundnose bit D 19 mm

Suitable for: Steel, Stainless steel and copper

Suitable for: Steel, Stainless steel and copper

Diameter 31.8mm R 9.5mm

Diameter 31.8mm R 9.5mm

Suitable for: Steel, Stainless steel and copper

Suitable for: Steel, Stainless steel and copper

JVL pro-line Raised panel chamfer bit 25°

JVL pro-line Raised panel chamfer bit 25°

JVL pro-line rounding over bit 31.8mm

JVL pro-line rounding over bit 31.8mm

Suitable for: Steel, Stainless steel, Cast iron, Aluminum and...

Suitable for: Steel, Stainless steel, Cast iron, Aluminum and copper

JVL Rounding over router bit R 6.35 mm with 8mm shank

JVL Rounding over router bit R 6.35 mm with 8mm shank

Spiral finishing cutter upcut Z2

Spiral finishing cutter upcut Z2

Dovetail bit HW D=13,5 A=13 degrees L=12,5 GL=44 S=8

Dovetail bit HW D=13,5 A=13 degrees L=12,5 GL=44 S=8

Spiral finishing cutter downcut Z2

Spiral finishing cutter downcut Z2

Face milling bit HW Z=2 D=20 L=13 GL=45 S=8

Face milling bit HW Z=2 D=20 L=13 GL=45 S=8

Two flute solid carbide spiral bit 5 mm with 8 mm shank....

Two flute solid carbide spiral bit 5 mm with 8 mm shank. Positive (upcut) spiral.

Two flute ogee cutter with exchangeable ball bearing and 8mm...

Two flute ogee cutter with exchangeable ball bearing and 8mm shank

Rounding over cutter R10 S=10mm

Rounding over cutter R10 S=10mm

Rounding over cutter with guide pin shank 8 mm

Rounding over cutter with guide pin shank 8 mm

Rounding over cutter with guide pin shank 8 mm

Rounding over cutter with guide pin shank 8 mm

Rounding over cutter with bearing for solid surface materials

Rounding over cutter with bearing for solid surface materials

Rounding over cutter R10  S8mm

Rounding over cutter R10  S8mm

Two flutes. With exchangeable ball bearing. The set combines a...

Two flutes. With exchangeable ball bearing. The set combines a profile cutter and a slotter. Both on a bearing mounted arbor. Stile and rail are produced by reversing the cutter parts. For woodthickness from 19 to 21 mm

Two flutes. With exchangeable ball bearing. The set combines a...

Two flutes. With exchangeable ball bearing. The set combines a profile cutter and a slotter. Both on a bearing mounted arbor. Stile and rail are produced by reversing the cutter parts. For woodthickness from 19 to 21 mm

ENT 17440 Rail- & Stile Cutter Chamfer TC. Type  A with 8...

ENT 17440 Rail- & Stile Cutter Chamfer TC. Type  A with 8 mm shank.  For woodthickness from 19 to 21 mm

Finger pull Cutters

Finger pull Cutters

Finger pull Cutters

Finger pull Cutters