JVL pro-line chamfer bit...
JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank
JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank
Filter By
Availability
Bore
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 75 products.
JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank
JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank
JVL pro-line roundnose bit D 19 mm
JVL pro-line roundnose bit D 19 mm
Suitable for: Steel, Stainless steel and copper
Suitable for: Steel, Stainless steel and copper
Suitable for: Steel, Stainless steel and copper
Suitable for: Steel, Stainless steel and copper
JVL pro-line Raised panel chamfer bit 25°
JVL pro-line Raised panel chamfer bit 25°
Suitable for: Steel, Stainless steel, Cast iron, Aluminum and...
Suitable for: Steel, Stainless steel, Cast iron, Aluminum and copper
JVL Rounding over router bit R 6.35 mm with 8mm shank
JVL Rounding over router bit R 6.35 mm with 8mm shank
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
Dovetail bit HW D=13,5 A=13 degrees L=12,5 GL=44 S=8
Dovetail bit HW D=13,5 A=13 degrees L=12,5 GL=44 S=8
Face milling bit HW Z=2 D=20 L=13 GL=45 S=8
Face milling bit HW Z=2 D=20 L=13 GL=45 S=8
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Rounding over cutter with guide pin shank 8 mm
Rounding over cutter with guide pin shank 8 mm
Rounding over cutter with bearing for solid surface materials
Rounding over cutter with bearing for solid surface materials
Straight bit shank 12 mm
Straight bit shank 12 mm
Trimming Cutter TC with Shear Cutting Angle and 12 mm shank...
Trimming Cutter TC with Shear Cutting Angle and 12 mm shank ENT 13465
Straight bit shank 12 mm
Straight bit shank 12 mm
Trimmers with bearing top and bottom
Trimmers with bearing top and bottom
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimming cutter with bearing on shank for scanning overhead...
Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.
Replacement tip Straight bit Z=1 Shank 12 mm
Replacement tip Straight bit Z=1 Shank 12 mm
Replacement tip Straight bit Z=1 Shank 12 mm
Replacement tip Straight bit Z=1 Shank 12 mm
Replacement tip bearing guide cutter. For coated boards, solid...
Replacement tip bearing guide cutter. For coated boards, solid wood and wood-basedmaterials
Replacement tip Straight bit Z=1 Shank 12 mm
Replacement tip Straight bit Z=1 Shank 12 mm