Filter By
Availability
Bore
Outside diameter
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
Single flute cutter with neck for plastic and aluminium
Single flute cutter with neck for plastic and aluminium
Suitable for: Steel, Stainless steel, Cast iron, aluminum,...
Suitable for: Steel, Stainless steel, Cast iron, aluminum, copper and plastics
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
Double flute milling cutter for plastic and aluminium
Double flute milling cutter for plastic and aluminium
Straight bit shank 6 mm
Straight bit shank 6 mm
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit S10 mm Lefthand rot.
Through hole drill bit D3 L57 S10 mm Righthand rot.
Through hole drill bit D3 L57 S10 mm Righthand rot.
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 6 mm
Straight bit shank 6 mm
Straight bit shank 6 mm
Straight bit shank 6 mm
Straight bit shank 8mm
Straight bit shank 8mm
Dowel drill bit shank 8 mm cylindrical Lefthand
Dowel drill bit shank 8 mm cylindrical Lefthand
Dowel drill bit shank 8 mm cylindrical Righthand
Dowel drill bit shank 8 mm cylindrical Righthand
Spiral cutter Z2 Positive - Upcut for Plastics Suitable for:...
Spiral cutter Z2 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 8mm
Straight bit shank 8mm
For use on twist drills with a 10 mm shank and a diameter of 4...
For use on twist drills with a 10 mm shank and a diameter of 4 mm to 10 mm.The countersinkis guided to the shank via the drill spiral and fastened there.
For use on twist drills with a 10 mm shank and a diameter of 4...
For use on twist drills with a 10 mm shank and a diameter of 4 mm to 10 mm.The countersinkis guided to the shank via the drill spiral and fastened there.
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight cutter for Plastics Suitable for: Acrylonitrile...
Straight cutter for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic, Plexi etc.)
Ball nose Spiral cutter Z1 Positive - Upcut for Plastics...
Ball nose Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Solid carbide milling cutter with rounded chip chamber and...
Solid carbide milling cutter with rounded chip chamber and mirror grinding. Optimized cutting geometry for processing all non-ferrous metals.
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
