Home

ENT Straight Cutter TC / One Flute with 8 mm shank

ENT Straight Cutter TC / One Flute with 8 mm shank

Suitable for: Steel, Stainless steel, Cast iron, Aluminum and...

Suitable for: Steel, Stainless steel, Cast iron, Aluminum and copper

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

ENT trimming cutter TC 6 x 19 x 64 mm with 8mm shank

ENT trimming cutter TC 6 x 19 x 64 mm with 8mm shank

ENT trimming cutter TC 19 x 19 x 62 mm with 8mm shank

ENT trimming cutter TC 19 x 19 x 62 mm with 8mm shank

Single flute cutter Z=1 for solid surface Suitable for...

Single flute cutter Z=1 for solid surface Suitable for Corian Hi-Macs Staron Avonite Hanex Varicor domovari

Single flute cutter Z=2 Negative for solid surface

Single flute cutter Z=2 Negative for solid surface

Single flute cutter Z=1 for solid surface

Single flute cutter Z=1 for solid surface

Single flute cutter Z=1 for solid surface

Single flute cutter Z=1 for solid surface

Single flute cutter Z=2 Negative for solid surface

Single flute cutter Z=2 Negative for solid surface

Bearing guide trimmer Z2 for solid surface Suitable for...

Bearing guide trimmer Z2 for solid surface Suitable for Corian Hi-Macs Staron Avonite Hanex Varicor domovari

Bottom cutting. suitable for plunge. With 8 mm shank

Bottom cutting. suitable for plunge. With 8 mm shank

Trimming cutter with bearing on shank for scanning overhead...

Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.

Trimming cutter with bearing on shank for scanning overhead...

Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.

Bearing guide trimmer double bearing for solid surface

Bearing guide trimmer double bearing for solid surface

Rounding over cutter R12 S=12mm

Rounding over cutter R12 S=12mm

Rounding over cutter with guide pin shank 8 mm

Rounding over cutter with guide pin shank 8 mm

Rounding over cutter with bearing for solid surface materials

Rounding over cutter with bearing for solid surface materials

ENT 17390 Tongue & Groove Set TC for wood thicknesses up...

ENT 17390 Tongue & Groove Set TC for wood thicknesses up to 19 mm. with 8 mm shank

rounding over both sides at once.Suitable for material...

rounding over both sides at once.Suitable for material thickness 16 tot 32 mm.Supplied with a range of shims.

Adjustable Double chamfering bit with bearing 16 to 32 mm....

Adjustable Double chamfering bit with bearing 16 to 32 mm. Titman BCS38-12

Tongue and groove cutter for solid surface

Tongue and groove cutter for solid surface

Tongue and groove cutter for solid surface

Tongue and groove cutter for solid surface

Finger pull Cutters D=22 R1=3 R2=1 S=12mm FPC22-12

Finger pull Cutters D=22 R1=3 R2=1 S=12mm FPC22-12