Filter By
Availability
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
Home
JVL pro-line rounding over...
JVL pro-line rounding over bit 31.8mm
JVL pro-line rounding over bit 31.8mm
Spiral finishing cutter D5...
Spiral finishing cutter upcut Z2
Spiral finishing cutter upcut Z2
- -10%
- -10%
Spiral finishing cutter D5...
Spiral finishing cutter downcut Z2
Spiral finishing cutter downcut Z2
- -10%
- -10%
Spiral bit solid carbide 5...
Two flute solid carbide spiral bit 5 mm with 8 mm shank....
Two flute solid carbide spiral bit 5 mm with 8 mm shank. Positive (upcut) spiral.
AS2 20,0x104
Suitable for: aluminum, copper, plastics
Suitable for: aluminum, copper, plastics
Ogee Cutter TC with Ball...
Two flute ogee cutter with exchangeable ball bearing and 8mm...
Two flute ogee cutter with exchangeable ball bearing and 8mm shank
Rounding over cutter R10...
Rounding over cutter R10 S=10mm
Rounding over cutter R10 S=10mm
- -10%
- -10%
Rounding over cutter D29...
Rounding over cutter with guide pin shank 8 mm
Rounding over cutter with guide pin shank 8 mm
- -10%
- -10%
Rounding over cutter R10 S8mm
Rounding over cutter R10 S8mm
Rounding over cutter R10 S8mm
- -10%
- -10%
Rail- & Stile Cutter...
Two flutes. With exchangeable ball bearing. The set combines a...
Two flutes. With exchangeable ball bearing. The set combines a profile cutter and a slotter. Both on a bearing mounted arbor. Stile and rail are produced by reversing the cutter parts. For woodthickness from 19 to 21 mm
Trimmer D12.7 L38 S12mm...
Bearing guide cutter with three cutting edges for particularly...
Bearing guide cutter with three cutting edges for particularly fine milling results.Equipped with two ball bearings to make prints on sensitive workpieces to avoid.
- -10%
- -10%
Trimmer D12.7 L38 S8mm...
Bearing guide cutter with three cutting edges for particularly...
Bearing guide cutter with three cutting edges for particularly fine milling results.Equipped with two ball bearings to make prints on sensitive workpieces to avoid.
- -10%
- -10%
Rail- & Stile Cutter...
Two flutes. With exchangeable ball bearing. The set combines a...
Two flutes. With exchangeable ball bearing. The set combines a profile cutter and a slotter. Both on a bearing mounted arbor. Stile and rail are produced by reversing the cutter parts. For woodthickness from 19 to 21 mm
Rail- & Stile Cutter...
ENT 17440 Rail- & Stile Cutter Chamfer TC. Type A with 8...
ENT 17440 Rail- & Stile Cutter Chamfer TC. Type A with 8 mm shank. For woodthickness from 19 to 21 mm
Rail- & Stile Cutter...
Two flutes. With exchangeable ball bearing. The set combines a...
Two flutes. With exchangeable ball bearing. The set combines a profile cutter and a slotter. Both on a bearing mounted arbor. Stile and rail are produced by reversing the cutter parts. For woodthickness from 19 to 21 mm