AS2 20,0x104
Suitable for: aluminum, copper, plastics
Suitable for: aluminum, copper, plastics
Filter By
Availability
Bore
Shank
Diameter (D)
Cutting length/height:
Total Length
Cutters
There are 13 products.
Suitable for: aluminum, copper, plastics
Suitable for: aluminum, copper, plastics
Bearing guide cutter with three cutting edges for particularly...
Bearing guide cutter with three cutting edges for particularly fine milling results.Equipped with two ball bearings to make prints on sensitive workpieces to avoid.
Bearing guide cutter with three cutting edges for particularly...
Bearing guide cutter with three cutting edges for particularly fine milling results.Equipped with two ball bearings to make prints on sensitive workpieces to avoid.
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 160x7,65 mm Z=2
grooving cutter TYPE B - 160x7,65 mm Z=2
grooving cutter TYPE B - 160x7,65 mm Z=2
grooving cutter TYPE B - 160x7,65 mm Z=2
Cutterhead with HW reversible knives and spurs for making thin...
Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm. can be combined with Type A milling head with the same diameter and bore.
Cutterhead with HW reversible knives and spurs for making thin...
Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm. can be combined with Type A milling head with the same diameter and bore.
Cutterhead with HW reversible knives and spurs for making thin...
Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm. can be combined with Type A milling head with the same diameter and bore.
Cutterhead with HW reversible knives and spurs for making thin...
Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm. can be combined with Type A milling head with the same diameter and bore.
Cutterhead with HW reversible knives and spurs for making thin...
Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm. can be combined with Type A milling head with the same diameter and bore.