Straight Cutter TC Z2 D12...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
Filter By
Availability
Bore
Shank
Diameter (D)
Cutting length/height:
Total Length
Cutters
There are 9 products.
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
Trimming Cutter TC with Shear Cutting Angle and 12 mm shank...
Trimming Cutter TC with Shear Cutting Angle and 12 mm shank ENT 13465
Trimmers with bearing
Trimmers with bearing
Replacement tip bearing guide cutter. For coated boards, solid...
Replacement tip bearing guide cutter. For coated boards, solid wood and wood-basedmaterials
Bore 30 mm. Cutterhead with HW reversible knives and spurs on...
Bore 30 mm. Cutterhead with HW reversible knives and spurs on both sides rebating and edging. Suitable for solid soft wood. chipboard. veneered and laminated panels. plywood. etc.The shear angle allows a better chip removal and a longer cutting edge life.
Bore 40mm. Cutterhead with HW reversible knives and spurs on...
Bore 40mm. Cutterhead with HW reversible knives and spurs on both sides rebating and edging. Suitable for solid soft wood. chipboard. veneered and laminated panels. plywood. etc.The shear angle allows a better chip removal and a longer cutting edge life.
Cutterhead with HW reversible knives and spurs on both sides...
Cutterhead with HW reversible knives and spurs on both sides rebating and edging. Suitable for solid soft wood, chipboard, veneered and laminated panels, plywood, etc.