Straight Cutter TC Z2 D12...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
Filter By
Availability
Bore
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 78 products.
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
Twist drill continuously cylindrical
Twist drill continuously cylindrical
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit L70 S10 mm Righthand rot.
Dowel drill bit L70 S10 mm Righthand rot.
Dowel drill bit L70 S10 mm Righthand rot.
Dowel drill bit L70 S10 mm Righthand rot.
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit L70 S10 mm Righthand rot.
Dowel drill bit L70 S10 mm Righthand rot.
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit L70 S10 mm Righthand rot.
Dowel drill bit L70 S10 mm Righthand rot.
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit L70 S10 mm Righthand rot.
Dowel drill bit L70 S10 mm Righthand rot.
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Trimming Cutter TC with Shear Cutting Angle and 12 mm shank...
Trimming Cutter TC with Shear Cutting Angle and 12 mm shank ENT 13465
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight cutter internal thread M10x1.5
Straight cutter internal thread M10x1.5
Trimmers with bearing top and bottom
Trimmers with bearing top and bottom
Straight bit shank 12 mm
Straight bit shank 12 mm
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Straight bit shank 12 mm
Straight bit shank 12 mm
Trimming cutter with bearing on shank for scanning overhead...
Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.
Replacement tip Straight bit Z=1 Shank 12 mm
Replacement tip Straight bit Z=1 Shank 12 mm
Replacement tip Straight bit Z=1 Shank 12 mm
Replacement tip Straight bit Z=1 Shank 12 mm
Replacement tip bearing guide cutter. For coated boards, solid...
Replacement tip bearing guide cutter. For coated boards, solid wood and wood-basedmaterials
Replacement tip Straight bit Z=1 Shank 12 mm
Replacement tip Straight bit Z=1 Shank 12 mm