BT4 1,5x40
Suitable for: Steel, Stainless steel, Cast iron, aluminum,...
Suitable for: Steel, Stainless steel, Cast iron, aluminum, copper and plastics
Filter By
Availability
Bore
Outside diameter
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 56 products.
Suitable for: Steel, Stainless steel, Cast iron, aluminum,...
Suitable for: Steel, Stainless steel, Cast iron, aluminum, copper and plastics
Suitable for: Steel, Stainless steel, Cast iron, aluminum,...
Suitable for: Steel, Stainless steel, Cast iron, aluminum, copper and plastics
Suitable for: Steel, Stainless steel, Cast iron, Aluminum and...
Suitable for: Steel, Stainless steel, Cast iron, Aluminum and copper
Suitable for: Steel, Stainless steel, Cast iron, Aluminum and...
Suitable for: Steel, Stainless steel, Cast iron, Aluminum and copper
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
Single flute cutter with neck for plastic and aluminium
Single flute cutter with neck for plastic and aluminium
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
Double flute milling cutter for plastic and aluminium
Double flute milling cutter for plastic and aluminium
Spiral cutter Z1 Negative - Down cut for Plastics Suitable...
Spiral cutter Z1 Negative - Down cut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Straight bit shank 6 mm
Straight bit shank 6 mm
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit S10 mm Lefthand rot.
Through hole drill bit D3 L57 S10 mm Righthand rot.
Through hole drill bit D3 L57 S10 mm Righthand rot.
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 6 mm
Straight bit shank 6 mm
Straight bit shank 6 mm
Straight bit shank 6 mm
Straight bit shank 8mm
Straight bit shank 8mm
Dowel drill bit shank 8 mm cylindrical Lefthand
Dowel drill bit shank 8 mm cylindrical Lefthand
Dowel drill bit shank 8 mm cylindrical Righthand
Dowel drill bit shank 8 mm cylindrical Righthand
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 8mm
Straight bit shank 8mm
Weather strip cutter bevel
Weather strip cutter bevel
Straight bit shank 8mm
Straight bit shank 8mm
Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10
Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10
Dovetail bit HW Z=2 D=20 A=10° L=16 GL=52 S=8
Dovetail bit HW Z=2 D=20 A=10° L=16 GL=52 S=8