PCD Diamond straight router...
PCD Diamond straight router bit bottom cutting
PCD Diamond straight router bit bottom cutting
Filter By
Availability
Bore
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 24 products.
PCD Diamond straight router bit bottom cutting
PCD Diamond straight router bit bottom cutting
Finishing cutter for through-hole milling Z3 For spy hole...
Finishing cutter for through-hole milling Z3 For spy hole milling and through holes
Roughing cutter for through-hole milling Z3 For pusher hole...
Roughing cutter for through-hole milling Z3 For pusher hole drilling and lock cylinder milling
Finishing cutter for through-hole milling Z3 For spy hole...
Finishing cutter for through-hole milling Z3 For spy hole milling and through holes
Roughing cutter for through-hole milling Z3 For pusher hole...
Roughing cutter for through-hole milling Z3 For pusher hole drilling and lock cylinder milling
Cutterhead with steel body, tungsten carbide standard...
Cutterhead with steel body, tungsten carbide standard reversible knives and spurs, adjustable with 1/10 mm spacing rings (included) for high precision groove cutting,
Cutterhead with steel body, tungsten carbide standard...
Cutterhead with steel body, tungsten carbide standard reversible knives and spurs, adjustable with 1/10 mm spacing rings (included) for high precision groove cutting,
Cutterhead with steel body, tungsten carbide standard...
Cutterhead with steel body, tungsten carbide standard reversible knives and spurs, adjustable with 1/10 mm spacing rings (included) for high precision groove cutting,
Cutterhead with steel body, tungsten carbide standard...
Cutterhead with steel body, tungsten carbide standard reversible knives and spurs, adjustable with 1/10 mm spacing rings (included) for high precision groove cutting,
Cutterhead with steel body, tungsten carbide standard...
Cutterhead with steel body, tungsten carbide standard reversible knives and spurs, adjustable with 1/10 mm spacing rings (included) for high precision groove cutting,
for high precision groove cutting, chip thickness limitation...
for high precision groove cutting, chip thickness limitation and reduced recoil, suitable for manual and mechanical feed.
Finishing cutter for through-hole milling Z3 For spy hole...
Finishing cutter for through-hole milling Z3 For spy hole milling and through holes
Roughing cutter for through-hole milling Z3 For pusher hole...
Roughing cutter for through-hole milling Z3 For pusher hole drilling and lock cylinder milling
adjustable cutterhead for tenons 200 x 8-15 mm Z=4 V=4
adjustable cutterhead for tenons 200 x 8-15 mm Z=4 V=4
adjustable cutterhead for tenons 200 x 8-15 mm Z=4 V=4
adjustable cutterhead for tenons 200 x 8-15 mm Z=4 V=4
adjustable cutterhead for tenons 200 x 8-15 mm Z=4 V=4
adjustable cutterhead for tenons 200 x 8-15 mm Z=4 V=4
adjustable cutterhead for tenons 200 x 8-15 mm Z=4 V=4
adjustable cutterhead for tenons 200 x 8-15 mm Z=4 V=4
adjustable cutterhead for tenons 200 x 8-15 mm Z=4 V=4
adjustable cutterhead for tenons 200 x 8-15 mm Z=4 V=4
Stark adjustable cutterhead for tenons 250x8-15 TH06TM10
Stark adjustable cutterhead for tenons 250x8-15 TH06TM10
Stark adjustable cutterhead for tenons 250x8-15 TH06TM10
Stark adjustable cutterhead for tenons 250x8-15 TH06TM10
Stark adjustable cutterhead for tenons 250x8-15 TH06TM10
Stark adjustable cutterhead for tenons 250x8-15 TH06TM10
Stark adjustable cutterhead for tenons 250x8-15 TH06TM10
Stark adjustable cutterhead for tenons 250x8-15 TH06TM10
Stark adjustable cutterhead for tenons 250x8-15 TH06TM10
Stark adjustable cutterhead for tenons 250x8-15 TH06TM10
LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN CCEN350127
LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN CCEN350127