PCD Diamond straight router...
PCD Diamond straight router bit bottom cutting
PCD Diamond straight router bit bottom cutting
Filter By
Availability
Bore
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 18 products.
PCD Diamond straight router bit bottom cutting
PCD Diamond straight router bit bottom cutting
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 160x7,65 mm Z=2
grooving cutter TYPE B - 160x7,65 mm Z=2
grooving cutter TYPE B - 160x7,65 mm Z=2
grooving cutter TYPE B - 160x7,65 mm Z=2
Cutterhead with HW reversible knives and spurs for making thin...
Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm. can be combined with Type A milling head with the same diameter and bore.
Cutterhead with HW reversible knives and spurs for making thin...
Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm. can be combined with Type A milling head with the same diameter and bore.
Cutterhead with HW reversible knives and spurs for making thin...
Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm. can be combined with Type A milling head with the same diameter and bore.
Cutterhead with HW reversible knives and spurs for making thin...
Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm. can be combined with Type A milling head with the same diameter and bore.
Cutterhead with HW reversible knives and spurs for making thin...
Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm. can be combined with Type A milling head with the same diameter and bore.
Finishing cutter for through-hole milling Z3 For spy hole...
Finishing cutter for through-hole milling Z3 For spy hole milling and through holes
Roughing cutter for through-hole milling Z3 For pusher hole...
Roughing cutter for through-hole milling Z3 For pusher hole drilling and lock cylinder milling
Finishing cutter for through-hole milling Z3 For spy hole...
Finishing cutter for through-hole milling Z3 For spy hole milling and through holes
Roughing cutter for through-hole milling Z3 For pusher hole...
Roughing cutter for through-hole milling Z3 For pusher hole drilling and lock cylinder milling
Finishing cutter for through-hole milling Z3 For spy hole...
Finishing cutter for through-hole milling Z3 For spy hole milling and through holes
Roughing cutter for through-hole milling Z3 For pusher hole...
Roughing cutter for through-hole milling Z3 For pusher hole drilling and lock cylinder milling
LOW-NOISE 30° pre-milling cutter 80x65x30+2KN CCEN350127
LOW-NOISE 30° pre-milling cutter 80x65x30+2KN CCEN350127