Bevel cutter 45° S8mm with...
Bevel cutter with bearing
Bevel cutter with bearing
- -10%
- -10%
Filter By
Availability
Bore
Shank
Diameter (D)
Cutting length/height:
Radius / Angle
There are 13 products.
Active filters
Bevel cutter with bearing
Bevel cutter with bearing
Bevel cutter with bearing
Bevel cutter with bearing
Bevel cutter with bearing
Bevel cutter with bearing
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 160x7,65 mm Z=2
grooving cutter TYPE B - 160x7,65 mm Z=2
grooving cutter TYPE B - 160x7,65 mm Z=2
grooving cutter TYPE B - 160x7,65 mm Z=2
Cutterhead with HW reversible knives and spurs for making thin...
Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm. can be combined with Type A milling head with the same diameter and bore.
Cutterhead with HW reversible knives and spurs for making thin...
Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm. can be combined with Type A milling head with the same diameter and bore.
Cutterhead with HW reversible knives and spurs for making thin...
Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm. can be combined with Type A milling head with the same diameter and bore.
Cutterhead with HW reversible knives and spurs for making thin...
Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm. can be combined with Type A milling head with the same diameter and bore.
Cutterhead with HW reversible knives and spurs for making thin...
Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm. can be combined with Type A milling head with the same diameter and bore.