Miniature bevel cutter with...
Miniature bevel cutter with bearing 45 degrees
Miniature bevel cutter with bearing 45 degrees
- -10%
- -10%
Filter By
Availability
Bore
Shank
Diameter (D)
Cutting length/height:
Radius / Angle
Cutters
There are 12 products.
Active filters
Miniature bevel cutter with bearing 45 degrees
Miniature bevel cutter with bearing 45 degrees
Miniature bevel cutter with bearing 45 degrees
Miniature bevel cutter with bearing 45 degrees
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 140X7,65 Z=2
grooving cutter TYPE B - 160x7,65 mm Z=2
grooving cutter TYPE B - 160x7,65 mm Z=2
grooving cutter TYPE B - 160x7,65 mm Z=2
grooving cutter TYPE B - 160x7,65 mm Z=2
Cutterhead with HW reversible knives and spurs for making thin...
Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm. can be combined with Type A milling head with the same diameter and bore.
Cutterhead with HW reversible knives and spurs for making thin...
Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm. can be combined with Type A milling head with the same diameter and bore.
Cutterhead with HW reversible knives and spurs for making thin...
Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm. can be combined with Type A milling head with the same diameter and bore.
Cutterhead with HW reversible knives and spurs for making thin...
Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm. can be combined with Type A milling head with the same diameter and bore.
Cutterhead with HW reversible knives and spurs for making thin...
Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm. can be combined with Type A milling head with the same diameter and bore.