AS2 20,0x104
Suitable for: aluminum, copper, plastics
Suitable for: aluminum, copper, plastics
Filter By
Availability
Bore
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 16 products.
Suitable for: aluminum, copper, plastics
Suitable for: aluminum, copper, plastics
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit L105 S10 mm Righthand rot.
Dowel drill bit L105 S10 mm Righthand rot.
Dowel drill bit L105 S10 mm Righthand rot.
Dowel drill bit L105 S10 mm Righthand rot.
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit L105 S10 mm Righthand rot.
Dowel drill bit L105 S10 mm Righthand rot.
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit L105 S10 mm Righthand rot.
Dowel drill bit L105 S10 mm Righthand rot.
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit L105 S10 mm Righthand rot.
Dowel drill bit L105 S10 mm Righthand rot.
Bearing guide cutter with three cutting edges for particularly...
Bearing guide cutter with three cutting edges for particularly fine milling results.Equipped with two ball bearings to make prints on sensitive workpieces to avoid.
Bearing guide cutter with three cutting edges for particularly...
Bearing guide cutter with three cutting edges for particularly fine milling results.Equipped with two ball bearings to make prints on sensitive workpieces to avoid.
LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN CSEN350086
LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN CSEN350086