Dovetail Cutter 9° 9.5 x...
ENT 15962 Dovetail Cutter 9° 9.5 x 9.5 mm with 8 mm shank
ENT 15962 Dovetail Cutter 9° 9.5 x 9.5 mm with 8 mm shank
Filter By
Availability
Bore
Outside diameter
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 47 products.
ENT 15962 Dovetail Cutter 9° 9.5 x 9.5 mm with 8 mm shank
ENT 15962 Dovetail Cutter 9° 9.5 x 9.5 mm with 8 mm shank
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
Single flute cutter with neck for plastic and aluminium
Single flute cutter with neck for plastic and aluminium
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
Double flute milling cutter for plastic and aluminium
Double flute milling cutter for plastic and aluminium
Two flute rounding over cutter with an exchangeable bearing...
Two flute rounding over cutter with an exchangeable bearing with 12.7 mm. For precise and clean rounded edges.
Straight bit shank 6 mm
Straight bit shank 6 mm
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit S10 mm Lefthand rot.
Through hole drill bit D3 L57 S10 mm Righthand rot.
Through hole drill bit D3 L57 S10 mm Righthand rot.
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 6 mm
Straight bit shank 6 mm
Straight bit shank 6 mm
Straight bit shank 6 mm
Straight bit shank 8mm
Straight bit shank 8mm
Dowel drill bit shank 8 mm cylindrical Lefthand
Dowel drill bit shank 8 mm cylindrical Lefthand
Dowel drill bit shank 8 mm cylindrical Righthand
Dowel drill bit shank 8 mm cylindrical Righthand
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10
Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10
Dovetail bit HW Z=2 D=20 A=10° L=16 GL=52 S=8
Dovetail bit HW Z=2 D=20 A=10° L=16 GL=52 S=8
Trimmers with bearing
Trimmers with bearing
Bearing guide cutter for trimming protruding veneer and...
Bearing guide cutter for trimming protruding veneer and plastic edges. Also possible tocopy using a template. The small diameters are ideal for processing inside corners.
Trimmers with bearing
Trimmers with bearing