Filter By

Availability

Bore

Shank

Diameter (D)

Cutting length/height:

Total Length

Radius / Angle

Cutters

Home

Active filters

  • Cutting length/height:: 9,5mm
  • Cutting length/height:: 65 mm
Dovetail Cutter 9° 9.5 x 9.5 mm ENT 15962

Dovetail Cutter 9° 9.5 x...

ENT 15962 Dovetail Cutter  9°  9.5 x 9.5 mm with 8 mm shank

ENT 15962 Dovetail Cutter  9°  9.5 x 9.5 mm with 8 mm shank

Price €17.50
Rounding Over Cutter R 2 mm ENT 14280

Rounding Over Cutter R 2...

Two flute rounding over cutter with an exchangeable bearing...

Two flute rounding over cutter with an exchangeable bearing with 12.7 mm. For precise and clean rounded edges.

Price €31.00
Finishing cutter D14 S14mm for through-hole milling Z3

Finishing cutter D14 S14mm...

Finishing cutter for through-hole milling Z3 For spy hole...

Finishing cutter for through-hole milling Z3 For spy hole milling and through holes

Price €229.50 Regular price €255.00
  • -10%
  • -10%
Roughing cutter D14 S14mm for through-hole milling Z3

Roughing cutter D14 S14mm...

Roughing cutter for through-hole milling Z3 For pusher hole...

Roughing cutter for through-hole milling Z3 For pusher hole drilling and lock cylinder milling

Price €235.80 Regular price €262.00
  • -10%
  • -10%
Finishing cutter D16 S16mm for through-hole milling Z3

Finishing cutter D16 S16mm...

Finishing cutter for through-hole milling Z3 For spy hole...

Finishing cutter for through-hole milling Z3 For spy hole milling and through holes

Price €261.00 Regular price €290.00
  • -10%
  • -10%
Roughing cutter D16 S16mm for through-hole milling Z3

Roughing cutter D16 S16mm...

Roughing cutter for through-hole milling Z3 For pusher hole...

Roughing cutter for through-hole milling Z3 For pusher hole drilling and lock cylinder milling

Price €269.10 Regular price €299.00
  • -10%
  • -10%
Finishing cutter D18 S18mm for through-hole milling Z3

Finishing cutter D18 S18mm...

Finishing cutter for through-hole milling Z3 For spy hole...

Finishing cutter for through-hole milling Z3 For spy hole milling and through holes

Price €306.00 Regular price €340.00
  • -10%
  • -10%
Roughing cutter D18 S18mm for through-hole milling Z3

Roughing cutter D18 S18mm...

Roughing cutter for through-hole milling Z3 For pusher hole...

Roughing cutter for through-hole milling Z3 For pusher hole drilling and lock cylinder milling

Price €312.30 Regular price €347.00
  • -10%
  • -10%
LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN CCEN350127

LOW-NOISE 45 degrees...

LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN CCEN350127

LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN CCEN350127

Price €488.00 Regular price €610.00
  • -20%
  • -20%
Back to top