Home

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

V-Groove cutter

V-Groove cutter

V-Groove cutter

V-Groove cutter

V-Groove cutter

V-Groove cutter

Dovetail bit Z=2 D=10 A=10° L=9 GL=45 S=8

Dovetail bit Z=2 D=10 A=10° L=9 GL=45 S=8

Profile guide cutter with bearing on shank

Profile guide cutter with bearing on shank

ENT 13821 Chamfer cutter 45 degrees with ball bearing and 8...

ENT 13821 Chamfer cutter 45 degrees with ball bearing and 8 mm shank

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  L105  S10 mm Righthand rot.

Dowel drill bit  L105  S10 mm Righthand rot.

Dowel drill bit  L105  S10 mm Righthand rot.

Dowel drill bit  L105  S10 mm Righthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  L105  S10 mm Righthand rot.

Dowel drill bit  L105  S10 mm Righthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  L105  S10 mm Righthand rot.

Dowel drill bit  L105  S10 mm Righthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  L105  S10 mm Righthand rot.

Dowel drill bit  L105  S10 mm Righthand rot.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Titman rounding cutter D=16,3 L=9 R=4 d=6,35 S=8

Titman rounding cutter D=16,3 L=9 R=4 d=6,35 S=8

Rounding over cutter with bearing for solid surface materials

Rounding over cutter with bearing for solid surface materials

Titman flute bit R=4 S=8

Titman flute bit R=4 S=8

LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN CSEN350086

LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN CSEN350086