JVL pro-line chamfer bit...
JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank
JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank
Filter By
Availability
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 22 products.
Active filters
JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank
JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank
JVL pro-line roundnose bit D 19 mm
JVL pro-line roundnose bit D 19 mm
Suitable for: Steel, Stainless steel and copper
Suitable for: Steel, Stainless steel and copper
Suitable for: Steel, Stainless steel and copper
Suitable for: Steel, Stainless steel and copper
JVL pro-line Raised panel chamfer bit 25°
JVL pro-line Raised panel chamfer bit 25°
Suitable for: Steel, Stainless steel, Cast iron, Aluminum and...
Suitable for: Steel, Stainless steel, Cast iron, Aluminum and copper
JVL Rounding over router bit R 6.35 mm with 8mm shank
JVL Rounding over router bit R 6.35 mm with 8mm shank
Dovetail bit HW D=13,5 A=13 degrees L=12,5 GL=44 S=8
Dovetail bit HW D=13,5 A=13 degrees L=12,5 GL=44 S=8
Face milling bit HW Z=2 D=20 L=13 GL=45 S=8
Face milling bit HW Z=2 D=20 L=13 GL=45 S=8
Rounding over cutter with guide pin shank 8 mm
Rounding over cutter with guide pin shank 8 mm
Rounding over cutter with bearing for solid surface materials
Rounding over cutter with bearing for solid surface materials
Titman stepped rebate bit 20,3/12,3mm and 18/9,5mm
Titman stepped rebate bit 20,3/12,3mm and 18/9,5mm
Titman stepped rebate bit HW Z=2 D=16.3x9 d=12.3x9.5 GL=90 S=8
Titman stepped rebate bit HW Z=2 D=16.3x9 d=12.3x9.5 GL=90 S=8
Titman stepped rebate Z=2 D=20.3x9 d=12.3x9.5 GL=90 S=8
Titman stepped rebate Z=2 D=20.3x9 d=12.3x9.5 GL=90 S=8
Finger pull Cutters
Finger pull Cutters
Finger pull Cutters
Finger pull Cutters
Finger pull Cutters
Finger pull Cutters
Hob cutter for solid surface
Hob cutter for solid surface