Single flute D5 S8mm...
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
- -10%
- -10%
Filter By
Availability
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 32 products.
Active filters
Single flute cutter for plastic and aluminium
Single flute cutter for plastic and aluminium
Suitable for: Steel, Stainless steel, Cast iron, aluminum,...
Suitable for: Steel, Stainless steel, Cast iron, aluminum, copper and plastics
Spiral cutter Z2 Positive - Upcut for Plastics Suitable for:...
Spiral cutter Z2 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
For use on twist drills with a 10 mm shank and a diameter of 4...
For use on twist drills with a 10 mm shank and a diameter of 4 mm to 10 mm.The countersinkis guided to the shank via the drill spiral and fastened there.
For use on twist drills with a 10 mm shank and a diameter of 4...
For use on twist drills with a 10 mm shank and a diameter of 4 mm to 10 mm.The countersinkis guided to the shank via the drill spiral and fastened there.
Straight cutter for Plastics Suitable for: Acrylonitrile...
Straight cutter for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic, Plexi etc.)
Ball nose Spiral cutter Z1 Positive - Upcut for Plastics...
Ball nose Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Solid carbide milling cutter with rounded chip chamber and...
Solid carbide milling cutter with rounded chip chamber and mirror grinding. Optimized cutting geometry for processing all non-ferrous metals.
Titman face milling router bit for wood D=35 L=18 Shank 8 mm
Titman face milling router bit for wood D=35 L=18 Shank 8 mm
Titman stepped rebate bit 20,3/12,3mm and 18/9,5mm
Titman stepped rebate bit 20,3/12,3mm and 18/9,5mm
Titman stepped rebate bit HW Z=2 D=16.3x9 d=12.3x9.5 GL=90 S=8
Titman stepped rebate bit HW Z=2 D=16.3x9 d=12.3x9.5 GL=90 S=8
Titman stepped rebate Z=2 D=20.3x9 d=12.3x9.5 GL=90 S=8
Titman stepped rebate Z=2 D=20.3x9 d=12.3x9.5 GL=90 S=8
Raised panel cutter GOG20
Raised panel cutter GOG20