Bevel cutter with guide pin...
For chamfering thin sheets, plywood, acrylic, etc. For...
For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.
- -10%
- -10%
Filter By
Availability
Bore
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 23 products.
For chamfering thin sheets, plywood, acrylic, etc. For...
For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.
Bevel cutter with real center cutting edge for direct...
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.
Bevel cutter with bearing
Bevel cutter with bearing
Straight bit shank 8mm
Straight bit shank 8mm
Bevel cutter with bearing for solid surface
Bevel cutter with bearing for solid surface
Straight bit shank 12 mm
Straight bit shank 12 mm
Diamond PCD rounding over bit Shank 8 mm
Diamond PCD rounding over bit Shank 8 mm
T-Slot cutter with radius
T-Slot cutter with radius
Titman Staff / corner bead HW Z=2 D=28,7 L=23 R=6,3 S=8
Titman Staff / corner bead HW Z=2 D=28,7 L=23 R=6,3 S=8
Diamond PCD rounding over bit Shank 8 mm
Diamond PCD rounding over bit Shank 8 mm
Profile mould cutter
Profile mould cutter
The following items are required to create the appropriate...
The following items are required to create the appropriate groove:Groover G36552-6.35 and arbor LDTA/8
Tooling set for rounding and chamfering 139mm
Tooling set for rounding and chamfering 139mm
YS118 Bore 30mm. Cutterset consisting of two elements in...
YS118 Bore 30mm. Cutterset consisting of two elements in light alloy execution. standard tungsten carbide reversible knives.for high precision planning and chamfering/rounding in one single working operation. adjustable formilling solid wood and all types of board material from 18-50 mm...
Tooling set for rounding and chamfering 139mm
Tooling set for rounding and chamfering 139mm
Tooling set for rounding and chamfering 139mm
Tooling set for rounding and chamfering 139mm
Bore 40mm. Cutterset consisting of two elements in light...
Bore 40mm. Cutterset consisting of two elements in light alloy execution. standard tungsten carbide reversible knives.for high precision planning and chamfering/rounding in one single working operation. adjustable formilling solid wood and all types of board material from 18-50 mm thickness...