Bevel cutter with guide pin...
For chamfering thin sheets, plywood, acrylic, etc. For...
For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.
- -10%
- -10%
Filter By
Availability
Bore
Thickness
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 28 products.
For chamfering thin sheets, plywood, acrylic, etc. For...
For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.
Bevel cutter with real center cutting edge for direct...
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.
Bevel cutter with bearing
Bevel cutter with bearing
for cutting brick, concrete, granite, ceramics
for cutting brick, concrete, granite, ceramics
Straight bit shank 8mm
Straight bit shank 8mm
Bevel cutter with bearing for solid surface
Bevel cutter with bearing for solid surface
Straight bit shank 12 mm
Straight bit shank 12 mm
Diamond PCD rounding over bit Shank 8 mm
Diamond PCD rounding over bit Shank 8 mm
T-Slot cutter with radius
T-Slot cutter with radius
Titman Staff / corner bead HW Z=2 D=28,7 L=23 R=6,3 S=8
Titman Staff / corner bead HW Z=2 D=28,7 L=23 R=6,3 S=8
Diamond PCD rounding over bit Shank 8 mm
Diamond PCD rounding over bit Shank 8 mm
Profile mould cutter
Profile mould cutter
End cutting sawblade 150x3.2x55+4 Z32+4 CSEN750036 IT03 End...
End cutting sawblade 150x3.2x55+4 Z32+4 CSEN750036 IT03 End Trimming Unit
The following items are required to create the appropriate...
The following items are required to create the appropriate groove:Groover G36552-6.35 and arbor LDTA/8
Stark CUTTERHEAD FOR 45 degrees BEVELS 150mm
Stark CUTTERHEAD FOR 45 degrees BEVELS 150mm
Stark CUTTERHEAD FOR 45 degrees BEVELS 150mm
Stark CUTTERHEAD FOR 45 degrees BEVELS 150mm
Stark CUTTERHEAD FOR 45 degrees BEVELS 150mm
Stark CUTTERHEAD FOR 45 degrees BEVELS 150mm
Stark rebate cutter steel body 150 x 50 mm
Stark rebate cutter steel body 150 x 50 mm
Stark rebate cutter steel body 150 x 50 mm
Stark rebate cutter steel body 150 x 50 mm
Stark rebate cutter steel body 150 x 50 mm
Stark rebate cutter steel body 150 x 50 mm
Stark rebate cutter steel body 150 x 50 mm
Stark rebate cutter steel body 150 x 50 mm
Stark rebate cutter steel body 150 x 50 mm
Stark rebate cutter steel body 150 x 50 mm