Filter By
Availability
Bore
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
Bi-metal M3 Hole Saws with vario-pitched teeth for...
Bi-metal M3 Hole Saws with vario-pitched teeth for applications where fast cutting and low price are the main challenges.
For chamfering thin sheets, plywood, acrylic, etc. For...
For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.
Bevel cutter with real center cutting edge for direct...
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.
Bevel cutter with bearing
Bevel cutter with bearing
Straight bit shank 8mm
Straight bit shank 8mm
Bevel cutter with bearing for solid surface
Bevel cutter with bearing for solid surface
Straight bit shank 12 mm
Straight bit shank 12 mm
Diamond PCD rounding over bit Shank 8 mm
Diamond PCD rounding over bit Shank 8 mm
T-Slot cutter with radius
T-Slot cutter with radius
Titman Staff / corner bead HW Z=2 D=28,7 L=23 R=6,3 S=8
Titman Staff / corner bead HW Z=2 D=28,7 L=23 R=6,3 S=8
Bevel cutter S=12 with high diameter
Bevel cutter S=12 with high diameter
Bevel cutter S=12 with high diameter
Bevel cutter S=12 with high diameter
Diamond PCD rounding over bit Shank 8 mm
Diamond PCD rounding over bit Shank 8 mm
Profile mould cutter
Profile mould cutter
The following items are required to create the appropriate...
The following items are required to create the appropriate groove:Groover G36552-6.35 and arbor LDTA/8
LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN CSEN350086
LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN CSEN350086
