Home

Suitable for: Steel, Stainless steel, Cast iron, aluminum,...

Suitable for: Steel, Stainless steel, Cast iron, aluminum, copper and plastics

Suitable for: Steel, Stainless steel, Cast iron, Aluminum and...

Suitable for: Steel, Stainless steel, Cast iron, Aluminum and copper

Suitable for: Steel, Stainless steel, Cast iron, Aluminum and...

Suitable for: Steel, Stainless steel, Cast iron, Aluminum and copper

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Suitable for: Steel, Stainless steel, Cast iron,...

Suitable for: Steel, Stainless steel, Cast iron, FE-superalloys, CO-superalloys, NI-superalloys, TI-superalloys

Spiral cutter Z1 Negative - Down cut for Plastics Suitable...

Spiral cutter Z1 Negative - Down cut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 6 mm

Straight bit shank 6 mm

Solid carbide milling cutter with rounded chip chamber and...

Solid carbide milling cutter with rounded chip chamber and mirror grinding. Optimized cutting geometry for processing all non-ferrous metals.

JVL STEAM circular saw blade 315mm x 32 x 2 Z200 - High speed...

JVL STEAM circular saw blade 315mm x 32 x 2 Z200 - High speed tungsten Molybdenum steel HSS DMo5 M2 - Steam threated. entry level blade - Suitable for manual and semi automatic cut off machines. - Holes (MX) 2/8/45 + 2/9/50 + 2/11/63

JVL STEAM Circular saw blade 315 x 32 x 2 Z120 T8 - High speed...

JVL STEAM Circular saw blade 315 x 32 x 2 Z120 T8 - High speed tungsten Molybdenum steel HSS DMo5 M2 - Steam threated. entry level blade - Suitable for manual and semi automatic cut off machines. - Holes (MX) 2/8/45 + 2/9/50 + 2/11/63

circular saw blade JVL OPTIMUS - Multi-layer AlTiCN coating...

circular saw blade JVL OPTIMUS - Multi-layer AlTiCN coating with a 3.0 µm thickness- Best coating for cutting all kinds of material- Top of the bill saw blade for heavy cutting conditions- Can be used with emulsion or spray cooling, for all metals (no blade change required)- Suitable for Flying...

circular saw blade JVL OPTIMUS - Multi-layer AlTiCN coating...

circular saw blade JVL OPTIMUS - Multi-layer AlTiCN coating with a 3.0 µm thickness- Best coating for cutting all kinds of material- Top of the bill saw blade for heavy cutting conditions- Can be used with emulsion or spray cooling, for all metals (no blade change required)- Suitable for Flying...

circular saw blade JVL OPTIMUS - Multi-layer AlTiCN coating...

circular saw blade JVL OPTIMUS - Multi-layer AlTiCN coating with a 3.0 µm thickness- Best coating for cutting all kinds of material- Top of the bill saw blade for heavy cutting conditions- Can be used with emulsion or spray cooling, for all metals (no blade change required)- Suitable for Flying...

circular saw blade JVL OPTIMUS - Multi-layer AlTiCN coating...

circular saw blade JVL OPTIMUS - Multi-layer AlTiCN coating with a 3.0 µm thickness- Best coating for cutting all kinds of material- Top of the bill saw blade for heavy cutting conditions- Can be used with emulsion or spray cooling, for all metals (no blade change required)- Suitable for Flying...

315 x2,5 x 32 Z160 Circular saw blade JVL OPTIMUS -...

315 x2,5 x 32 Z160 Circular saw blade JVL OPTIMUS - Multi-layer AlTiCN coating with a 3.0 µm thickness- Best coating for cutting all kinds of material- Top of the bill saw blade for heavy cutting conditions- Can be used with emulsion or spray cooling, for all metals (no blade change required)-...