BI-METAL EasyXcut M3 hole...
Bi-metal M3 Hole Saws with vario-pitched teeth for...
Bi-metal M3 Hole Saws with vario-pitched teeth for applications where fast cutting and low price are the main challenges.
Filter By
Availability
Bore
Thickness
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 28 products.
Bi-metal M3 Hole Saws with vario-pitched teeth for...
Bi-metal M3 Hole Saws with vario-pitched teeth for applications where fast cutting and low price are the main challenges.
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
Straight bit shank 8mm
Straight bit shank 8mm
For milling a shadow gap or water surge at the basin and water...
For milling a shadow gap or water surge at the basin and water drainage channels on the sink.
V-Groove cutter 108° S8mm for ALUCOBOND, DiBOND, REYNOBOND
V-Groove cutter 108° S8mm for ALUCOBOND, DiBOND, REYNOBOND
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Straight bit shank 8mm
Straight bit shank 8mm
Trimming bevel cutter with bearing
Trimming bevel cutter with bearing
Straight bit shank 12 mm
Straight bit shank 12 mm
Ballbearings diameter 16 mm and 12,7 mm included.
Ballbearings diameter 16 mm and 12,7 mm included.
Straight bit shank 12 mm
Straight bit shank 12 mm
JVL STEAM circular saw blade 315mm x 32 x 2 Z200 - High speed...
JVL STEAM circular saw blade 315mm x 32 x 2 Z200 - High speed tungsten Molybdenum steel HSS DMo5 M2 - Steam threated. entry level blade - Suitable for manual and semi automatic cut off machines. - Holes (MX) 2/8/45 + 2/9/50 + 2/11/63
JVL STEAM Circular saw blade 315 x 32 x 2 Z120 T8 - High speed...
JVL STEAM Circular saw blade 315 x 32 x 2 Z120 T8 - High speed tungsten Molybdenum steel HSS DMo5 M2 - Steam threated. entry level blade - Suitable for manual and semi automatic cut off machines. - Holes (MX) 2/8/45 + 2/9/50 + 2/11/63
Straight bit shank 12 mm
Straight bit shank 12 mm
circular saw blade JVL OPTIMUS - Multi-layer AlTiCN coating...
circular saw blade JVL OPTIMUS - Multi-layer AlTiCN coating with a 3.0 µm thickness- Best coating for cutting all kinds of material- Top of the bill saw blade for heavy cutting conditions- Can be used with emulsion or spray cooling, for all metals (no blade change required)- Suitable for Flying...
circular saw blade JVL OPTIMUS - Multi-layer AlTiCN coating...
circular saw blade JVL OPTIMUS - Multi-layer AlTiCN coating with a 3.0 µm thickness- Best coating for cutting all kinds of material- Top of the bill saw blade for heavy cutting conditions- Can be used with emulsion or spray cooling, for all metals (no blade change required)- Suitable for Flying...
circular saw blade JVL OPTIMUS - Multi-layer AlTiCN coating...
circular saw blade JVL OPTIMUS - Multi-layer AlTiCN coating with a 3.0 µm thickness- Best coating for cutting all kinds of material- Top of the bill saw blade for heavy cutting conditions- Can be used with emulsion or spray cooling, for all metals (no blade change required)- Suitable for Flying...
circular saw blade JVL OPTIMUS - Multi-layer AlTiCN coating...
circular saw blade JVL OPTIMUS - Multi-layer AlTiCN coating with a 3.0 µm thickness- Best coating for cutting all kinds of material- Top of the bill saw blade for heavy cutting conditions- Can be used with emulsion or spray cooling, for all metals (no blade change required)- Suitable for Flying...
315 x2,5 x 32 Z160 Circular saw blade JVL OPTIMUS -...
315 x2,5 x 32 Z160 Circular saw blade JVL OPTIMUS - Multi-layer AlTiCN coating with a 3.0 µm thickness- Best coating for cutting all kinds of material- Top of the bill saw blade for heavy cutting conditions- Can be used with emulsion or spray cooling, for all metals (no blade change required)-...
Replacement tip Straight bit Z=2 Shank 12 mm
Replacement tip Straight bit Z=2 Shank 12 mm
Replacement tip straight cutter internal thread M12x1
Replacement tip straight cutter internal thread M12x1
Replacement tip straight cutter internal thread M12x1
Replacement tip straight cutter internal thread M12x1
Replacement tip Straight bit Z=2 Shank 12 mm
Replacement tip Straight bit Z=2 Shank 12 mm
Replacement tip straight cutter internal thread M12x1
Replacement tip straight cutter internal thread M12x1
Replacement tip straight cutter internal thread M12x1
Replacement tip straight cutter internal thread M12x1
Replacement tip Straight bit Z=2 Shank 12 mm
Replacement tip Straight bit Z=2 Shank 12 mm