JVL pro-line chamfer bit...
JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank
JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank
Filter By
Availability
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 41 products.
JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank
JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank
Bi-metal M3 Hole Saws with vario-pitched teeth for...
Bi-metal M3 Hole Saws with vario-pitched teeth for applications where fast cutting and low price are the main challenges.
JVL Rounding over router bit R 4.8 mm with 8mm shank
JVL Rounding over router bit R 4.8 mm with 8mm shank
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
For milling thin-walled panels in caravan construction
For milling thin-walled panels in caravan construction
Bearing guide cutter for trimming protruding veneer and...
Bearing guide cutter for trimming protruding veneer and plastic edges. Also possible tocopy using a template. The small diameters are ideal for processing inside corners.
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Bearing guide trimmer Z2 for solid surface Suitable for...
Bearing guide trimmer Z2 for solid surface Suitable for Corian Hi-Macs Staron Avonite Hanex Varicor domovari
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 6 mm
Straight bit shank 6 mm
Miniature bevel cutter with bearing 45 degrees
Miniature bevel cutter with bearing 45 degrees
Miniature bevel cutter with bearing 45 degrees
Miniature bevel cutter with bearing 45 degrees
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Straight bit shank 8mm
Straight bit shank 8mm
Rounding over cutter with guide pin shank 8 mm
Rounding over cutter with guide pin shank 8 mm
Rounding over cutter with bearing for solid surface materials
Rounding over cutter with bearing for solid surface materials
Titman Staff / corner bead bit with bearing HW Z=2 D=22 L=14...
Titman Staff / corner bead bit with bearing HW Z=2 D=22 L=14 R=3,2 S=8
Water channel cutter
Water channel cutter
Diamond PCD rounding over bit Shank 8 mm
Diamond PCD rounding over bit Shank 8 mm
Diamond PCD rounding over bit Shank 8 mm
Diamond PCD rounding over bit Shank 8 mm
Straight bit shank 12 mm
Straight bit shank 12 mm