AB2 4,0x50
Suitable for: aluminum, copper, plastics
Suitable for: aluminum, copper, plastics
Filter By
Availability
Bore
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 34 products.
Suitable for: aluminum, copper, plastics
Suitable for: aluminum, copper, plastics
Suitable for: Steel, Stainless steel, Cast iron, aluminum,...
Suitable for: Steel, Stainless steel, Cast iron, aluminum, copper and plastics
Suitable for: Steel, Stainless steel, Cast iron, aluminum,...
Suitable for: Steel, Stainless steel, Cast iron, aluminum, copper and plastics
Suitable for: Steel, Stainless steel, Cast iron, Aluminum and...
Suitable for: Steel, Stainless steel, Cast iron, Aluminum and copper
Knife in HW 16x16.5x2 R=1.5 3402A0086 for Biesse
Knife in HW 16x16.5x2 R=1.5 3402A0086 for Biesse
Knife in HW R=1.5 N3402N0124
Knife in HW R=1.5 N3402N0124
Knife in HW 16.5x16x2 R=1.5 CCEN700012
Knife in HW 16.5x16x2 R=1.5 CCEN700012
Rounding over cutter R10 S=10mm
Rounding over cutter R10 S=10mm
Rounding over cutter R10 S8mm
Rounding over cutter R10 S8mm
Coving cutter with 90 degrees tangential outlet for solid surface
Coving cutter with 90 degrees tangential outlet for solid surface
Cove mould cutter with bearing
Cove mould cutter with bearing
Face milling cutter for solid surface
Face milling cutter for solid surface
Premium Half round cutter
Premium Half round cutter
Guttering cutter with high cutting length 12 mm Shank
Guttering cutter with high cutting length 12 mm Shank
Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CCW...
Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CCW N3401N0396
Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CW...
Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CW N3401N0395
Tilted trimmer with interchangeable knives 75x20x16+2KN R=1,5...
Tilted trimmer with interchangeable knives 75x20x16+2KN R=1,5 N3401N0432
Stark YS107BZM Multiradius roundover cutter Light alloy body,...
Stark YS107BZM Multiradius roundover cutter Light alloy body, reduced recoil suitable for manual feed.Comes with: - set knives R5/R10- set knives R4/R8- set knives R3/R6- allen key- case
Half round set (R = 8-9-10 included)
Half round set (R = 8-9-10 included)
Half round set (R = 8-9-10 included)
Half round set (R = 8-9-10 included)
Half round set (R = 8-9-10 included)
Half round set (R = 8-9-10 included)
Half round set (R = 8-9-10 included)
Half round set (R = 8-9-10 included)
Half round set (R = 8-9-10 included)
Half round set (R = 8-9-10 included)
Steel body with standard tungsten carbide profiled knives for...
Steel body with standard tungsten carbide profiled knives for quarter rounds, axial angle for excellentmilling results and reduced cutting pressure, different radius can be fitted onto the same tool body, R=3, 4, 5, 6, 8 and 10mm included