AB2 4,0x50
Suitable for: aluminum, copper, plastics
Suitable for: aluminum, copper, plastics
Filter By
Availability
Bore
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 49 products.
Suitable for: aluminum, copper, plastics
Suitable for: aluminum, copper, plastics
Suitable for: Steel, Stainless steel, Cast iron, aluminum,...
Suitable for: Steel, Stainless steel, Cast iron, aluminum, copper and plastics
Suitable for: Steel, Stainless steel, Cast iron, aluminum,...
Suitable for: Steel, Stainless steel, Cast iron, aluminum, copper and plastics
Suitable for: Steel, Stainless steel, Cast iron, Aluminum and...
Suitable for: Steel, Stainless steel, Cast iron, Aluminum and copper
Knife in HW 16x16.5x2 R=1.5 3402A0086 for Biesse
Knife in HW 16x16.5x2 R=1.5 3402A0086 for Biesse
Knife in HW R=1.5 N3402N0124
Knife in HW R=1.5 N3402N0124
Knife in HW 16.5x16x2 R=1.5 CCEN700012
Knife in HW 16.5x16x2 R=1.5 CCEN700012
Rounding over cutter R=8 S=10 mm
Rounding over cutter R=8 S=10 mm
Rounding over cutter with guide pin shank 8 mm
Rounding over cutter with guide pin shank 8 mm
Rounding over cutter with bearing for solid surface materials
Rounding over cutter with bearing for solid surface materials
Rounding over cutter R8 S8mm
Rounding over cutter R8 S8mm
Premium Half round cutter
Premium Half round cutter
Premium Half round cutter
Premium Half round cutter
Cove mould cutter with bearing
Cove mould cutter with bearing
Diamond PCD rounding over bit Shank 8 mm
Diamond PCD rounding over bit Shank 8 mm
Face milling cutter for solid surface
Face milling cutter for solid surface
Guttering cutter with high cutting length 12 mm Shank
Guttering cutter with high cutting length 12 mm Shank
Rounding cutter with interchangeable knives 60/70X16X16+2KN...
Rounding cutter with interchangeable knives 60/70X16X16+2KN R=1.5 CCW 3401A0354
Rounding cutter with interchangeable knives 60/70X16X16+2KN...
Rounding cutter with interchangeable knives 60/70X16X16+2KN R1.5 CW 3401A0353 AR02-E
Tilted fine trimmer 75x25x16+2KN R1.5/2/3/25° CCW N3401N0392
Tilted fine trimmer 75x25x16+2KN R1.5/2/3/25° CCW N3401N0392
Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CCW...
Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CCW N3401N0396
Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CW...
Tilted fine trimmer 75x25x16+2KN R=1/1,5/2/25 degrees CW N3401N0395
This set was designed to produce a variety of concave and...
This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.